Crystallization analysis of AlMg (AG 10) alloy with use of ATND method

• Autorzy: Ciućka T.
• Języki publikacji: EN

Abstrakty

EN

The paper presents results of non-ferrous metal crystallization research with use of ATND method. The research was carried out in the Faculty of Chipless Forming Technology, University of Bielsko-Biała. The new method of analysis of non-ferrous metals alloy crystallization assures complete picture of generated structural components of the alloy. Structural components defined in the tested alloy using ATND method have been verified by X-ray microanalysis, which unambiguously has confirmed their presence. Below are presented results of the crystallization analysis with ATND method in graphic form (crystallization diagrams). In crystallization diagrams of AG10 alloy there were shown curves (thermal curve with its derivative, voltage curve and its derivative). Individual structural components crystallizing in the tested alloy are reflected on curves of the method in form of characteristic peaks. The research was carried out on AG10 aluminum-magnesium cast alloy. Moreover, the paper shows the structures of the tested alloy together with marked structural components, identified with use of X-ray microanalysis.

Słowa kluczowe

EN

crystallization; casting processes; ATND method; ATD method

PL

krystalizacja; procesy odlewnicze; metoda ATND; metoda ATD

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2007
• Tom: Vol. 7, iss. 1
• Strony: 61--64
• Opis fizyczny: Bibliogr. 11 poz., rys., tab.

Twórcy

autor

Ciućka T.

• Department of Manufacturing Technology and Automation, Faculty of Chipless Forming Technology University of Bielsko-Biała, 43 – 300 Bielsko–Biała, Willowa 2,

Bibliografia

• [1] E. Fraś: Crystallization of metals and alloys. PWN, Warszawa 1992 r. (in Polish).
• [2] Z. Górny: Cast alloys of non-ferrous metals. WNT, Warszawa 1992 r. (in Polish).
• [3] L.F. Mondolfo: Aluminum alloys. Structure and Properties. Butter Wooths, London, Boston 1976.
• [4] S. Pietrowski: Silumins for pistons. PAN Solidification of metals and alloys, Zeszyt 29, Monografia, Katowice 1997 r. (in Polish)
• [5] S. Pietrowski: Silumins. Wydawnictwo Politechniki Łódzkiej, Łódź 2001 r. (in Polish).
• [6] P. Wasilewski: Silumins -modification and its effect on structure and properties. PAN Solidification of metals and alloys, Zeszyt 21, Monografia, Katowice 1993 r. (in Polish).
• [7] T. Ciućka: Registration of crystallization process of AlSi20CuNiAK20 cast alloy with use of ATND method, Archiwum Odlewnictwa 2005 R. 5 nr 17 s.45-50. (in Polish).
• [8] T. Ciućka: Crystallization process curves of synthetic cast alloy on aluminum base (AlCu7Ni5Fe3), Archiwum Odlewnictwa 2006 R. 6 nr 19 s.49-54. (in Polish).
• [9] J. Pezda, T. Ciućka: Determination of mechanical properties of AK9 silumin, ATND method, IX Międzynarodowa konferencja Naukowo-Techniczna, Nauka i Technologia, Wydawnictwo AGH, Kraków 2006 r. (in Polish).
• [10] T. Ciućka: Registration of crystallization of AG51 cast alloy (Al-Mg5-Si1) with ATND method, Archiwum Odlewnictwa 2006 R. 6 nr 18 (1/2) s.191-196. (in Polish).
• [11] T. Ciućka: Registration of crystallization process of AlMg alloy with ATND method, Archiwum Odlewnictwa, 2006 R. 6 nr 22, s.127-132. (in Polish).