Composites applied for pistons

• Autorzy: Dolata-Grosz A. , Dyzia M. , Śleziona J. , Wieczorek J.
• Języki publikacji: EN

Abstrakty

EN

In the article the possibility of application the composite materials in casts into metal mould to form the pistons for compressors have been presented. In cooperation with "Zlotecki" company was undertaken the test of casting in productive conditions the aluminium alloy matrix composites reinforced with silicon carbide particles and composites reinforced with the mixture of the silicon carbide (SiC) and amorphous glass carbon particles. On the basis microstructural investigations were affirmed the uniformly distribution of reinforcing particles on the cross section of studied pistons. Realized technological tests confirmed the possibility of formation composite pistons with one kind of reinforcing phase and heterophase reinforcement from utilization the technology of mould casting.

Słowa kluczowe

EN

AMMCs; mould casting; ceramic particles; microstructure; hardness

PL

forma odlewnicza; cząstki ceramiczne; mikrostruktura; twardość

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2007
• Tom: Vol. 7, iss. 1
• Strony: 37--40
• Opis fizyczny: Bibliogr. 16 poz., rys., fot.

Twórcy

autor

Dolata-Grosz A.

autor

Dyzia M.

autor

Śleziona J.

autor

Wieczorek J.

• Silesian University of Technology, Faculty of Materials Science and Metallurgy, Department of Alloys and Composite Materials Technology, Str. Krasińskiego 8, 40-019 Katowice, Poland,

Bibliografia

• [1] Degischer H. P., Prader P., San Marchi Ch., Assessment of Metal Matrix Composites for Innovations - intermediate report of a European Thematic Network. Composites Part A. 32 (2001), p. 1161-1166.
• [2] Taha M.A. Practicalization of cast metal matrix composites (MMCCs), Materials and Design 22 (2001) p. 431-441.
• [3] Lee H.S., Yeo J.S., Hong S.H., Yoon D.J., Na K.H, The fabrication process and mechanical properties of SiCp/Al-Si metal matrix composites for automobile air-conditioner compressor pistons, Journal of Materials Processing Technology 113 (2001), p. 202-208.
• [4] Rudnik D., Wojciechowski A., Pietrzak K., Sobczak J., Sławiński Z.: Development of metal matrix composites engine pistons - a quantitative metallographic analysis of the structure, IV Seminar: Composite 2000 Theory and Practice, p. 170-179, (in polish).
• [5] Rudnik D., Sobczak J.: Composite pistons for internal combustion' engine, ITS, ISBN 83-913045-7-4, Warsaw 2001, (in polish).
• [6] Dyzia M., Dolata-Grosz A., Wieczorek J., Śleziona J., Starczewski M.: Composite pistons for air compressor producing by mould casting method, Composites, 2007, (in press).
• [7] Dyzia M., Dolata-Grosz A., Wieczorek J., Śleziona J.: Application of AMMCs for mould casting for air compressor pistons, Euromat 2007, (in press).
• [8] Pietrowski S.: Odlewanie kół samochodowych z siluminów, Archiwum Odlewnictwa, nr 4, s. 210÷221 (2002)
• [9 ] Pietrowski S.: Siluminy tłokowe. Monografia. Krzepniecie Metali i Stopów. PAN - Komisja Odlewnictwa, z. 29, 1997
• [10] Hashim J., Looney L., Hashmi M.S.J, Metal matrix composites: production by the stir casting method, Journal of Materials Processing Technology 92-93 (1999), p.1-7.
• [11] Kaczmar J.W., Pietrzak K., Włosinński W., The production and application of metal matrix composite materials, Journal of Materials Processing Technology 106 (2000), p. 58-67.
• [12] Śleziona J., Dyzia M., Wieczorek J. Casting properties of AlSi-SiC composite suspensions, Archies of Foundry, Year 2006, Vol. 6, No 22, p. 540-545.
• [13] Dolata-Grosz A., Wieczorek J., Śleziona J., Dyzia M.: Possibilities of the use of vacuous technologies for composite mixture quality rising, Archies of Foundry, Year 2006, Vol. 6, No 18 (1/2), p. 285-290.
• [14] Śleziona J., Wieczorek J., Dolata-Grosz A.: The influence of the degassing process on the structure of aluminium composites containing glass carbon and silicon carbide particles, Material Science No 3 (151), 2006, p. 665-667.
• [15] Szweycer M., Gawdzińska K., Jackowski J.: Analiza warunków tworzenia się porowatości gazowej w metalowych kompozytach nasycanych, Archiwum Maszyn i Automatyzacji, vol. 21, nr 6, Poznań 2001, p. 171-176.
• [16] Dolata-Grosz A., Śleziona J.: The influence of centrifugal casting on the quality of aluminum composites reinforced with ceramic particles and intermetalic phases - porosity aspect, Archies of Foundry, Year 2004, Vol. 4, No 11, p. 114-121.