The optimization of the cryogenic processing Al-Cu alloys

• Autorzy: Stankowiak A. , Bydałek A. W.
• Języki publikacji: EN

Abstrakty

EN

In the article was introduced the investigations defining optimization of the cryogenic processing after saturating the alloy AlCu4, 7. The qualification of the influence this processes was planned (in the function of temperature and time) on microstructure and the mechanical proprieties of this alloy. There are accept the wide range of the temperature 175oC - 350oC there made possible the settlement of the influence of the temperature of aging on the kinetics of the break-up of the permeated with solution [alpha] and then on the change of microstructure and mechanical proprieties. There were applied the times of aging from 30 to 240 min. Results of investigations were compared with results after such thermal processing itself without the cryogenic processing after saturating.

Słowa kluczowe

EN

investigation of DTA; cryogenic processing; saturates; ages; dispersal hardening

PL

badanie DTA; obróbka kriogeniczna; nasycenie; hartowanie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2007
• Tom: Vol. 7, iss. 3
• Strony: 141--146
• Opis fizyczny: Bibliogr. 13 poz., rys., tab.

Twórcy

autor

Stankowiak A.

autor

Bydałek A. W.

• State Higher Professional School, Polytechnic Institute, St Mickiewicza 5, 64-100 Leszno, Poland,

Bibliografia

• [1] Tokarski M.: Metaloznawstwo metali i stopów nieżelaznych. Śląsk 1985.
• [2] Blicharski M.: Wstęp do inżynierii materiałowej. WNT 2001.
• [3] R.F.Baron " Cryogenic treatment of metals to improve wear reasistance ".Cryogenics . August 1982 s. 409.
• [4] D.N.Collins Deep Cryogenic Treatment of Tool Steel: a Review Heat Treatment of Metals 1996 s.40.
• [5] D.N. Collins and J.Dormer Deep Cryogenic Treatment of a D2 Cold - work Tool Steel Hear treatment of Metals 1997 s.71.
• [6] R.Ebner, H.Leitner, D.Caliskanogulu, S.Marsoner, F.Jeglitsch "Methods for characterising the precipitation of nanometer - sized secondary carbides and related effects in tool steels " Zeitsrift fur Metallkunde 92 (2001) 7 s.821.
• [7] D.Mohan Lal, S.Renganarayanan, A.Kalanidi Cryogenic treatment to augment wear resistance of tool and die steels, Cryogenics 41 (2001) s.149.
• [8] R.Mahmudi, H.M.Ghasemi and H.R. Faradij Effects of Cryogenic Treatment on Mechanical Properties and Wear Behaviour of High -Speed Steel M2" Heat Treatment of Metals 2000.3 s.69-72.
• [9] D.A.Porter, K.E. Easterling "Phase Transformations in Metals and Alloys". Van Nostrand Reinhold Company, New York 1981 s. 291-308 i 417- 422.
• [10] H. Kacar, E. Atik, C. Meric "The effect of precipitation- hardening conditions on wear behaviours at 2024 aluminium wrought alloy" Journal of Materials Processing Technology 142 (2003) 762-766.
• [11] I. Wierszyłłowski, S.Wieczorek, A. Stankowiak, J.Samolczyk " Kinetics during supersaturation and ageing of the Al.-4.7 mass % Cu alloy : grain size , dilatometric and DTA studies" Journal of Phase Equilibria and Diffusion vol.26. No.2005 s.555.
• [12] I. Wierszyłłowski, A. Stankowiak, S. Wieczorek "Cryogenic treatment of suprtsaturated Al-4.7%Cu alloy. The influence on properties and transformation kinetics" Aluminium 2005 Conference 12-14 October 2005 Kliczków - Poland.
• [13] A. Stankowiak, A.W. Bydałek "Wpływ obróbki kriogenicznej po przesycaniu na własności mechaniczne starzonego stopu Al4,7Cu" X Krajowa Konferencja Wytrzymałości Materiałów i Badania Materiałów, 20-22 września 2006, Kudowa Zdrój.