The remelting of C90U steel with using GTAW method

• Autorzy: Adamiak S.
• Języki publikacji: EN

Abstrakty

EN

This work presents results of investigation the C90U steel surface remelting with a concentrated energy beam, using the GTAW method. The top surface layer of the C90U steel was partially remelted at the welding head feed rate of 200 mm/min, and the electric arc current of 50 through 300A. Microscopic inspection of resulting structure, as well as remelted layers' geometry and hardness measurements were conducted. The correlation between electric arc current and the remelted layers' geometry, microstructure and micro-hardness was derived. In the remelted zone, numerous inter-crystalline cracks were found with the current intensity of 200 and 300A.

Słowa kluczowe

EN

heat treatment; metallography; steel; surface layer partial remelting; GTAW method

PL

obróbka cieplna; stal; metalografia; warstwa wierzchnia; topienie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2007
• Tom: Vol. 7, iss. 3
• Strony: 7--10
• Opis fizyczny: Bibliogr. 7 poz., rys.

Twórcy

autor

Adamiak S.

• Rzeszow University, Institute of Technics, Rejtana 16a Str., 35-111 Rzeszów,

Bibliografia

• [1] A.W.Orłowicz, A.Trytek, Effect of rapid solidification on sliding wear of iron castings, Wear 9258, 2002.
• [2] Z. Nitkiewicz, J. Iwaszko, The use of arc plasma in surface engineering. Material engineering, 6, 373-375, 2000, (in Polish).
• [3] A.W.Orłowicz, M.Mróz, Thermal coefficients of the GTAW method. Archives of Foundry, Year 2003, no 3, 2003, (in Polish).
• [4] Y.Adonyj, R.W.Richardson, W.A.Beaslack, Investigation of arc force effects in surface GTAW welding. Welding Journal, 9, 35-44, 1996.
• [5] Z.Opiekun, A.Trytek, The influence of plasma-generating gas on the quantity of heat taken by surface layer partially remelted casts of the MAR-M509 alloy, Archives of Foundry, Year 2006, no 18(1/2), 401-406, 2006, (in Polish).
• [6] W. Orłowicz, M, Mróz, A. Tryte, Heating efficiency in the GTAW process. Acta Metallurgica Slovaca, No 2, 539-543, 1999.
• [7] M. Mróz, A. Orłowicz, M. Tupaj, Thermal coefficients of the GTAW method, Archives of Foundry, Year 2005, no 17, s. 217-224, 2005, (in Polish)