The new foundry line for magnesium alloys high-pressure die-casting

• Autorzy: Błaszczyk-Malik K. N. , Walczak W. , Braszczyński J.
• Języki publikacji: EN

Abstrakty

EN

The new foundry line for high-pressure die-casting of magnesium alloys constructed in the "SILUM" Foundry (Opojowice, Poland) is described. In the process cold chamber die-casting machines are used. The experimental casts and the radiators fabricated using the new cold chamber die-casting line are presented as the final results. The new production line allows to obtain good quality magnesium casts.

Słowa kluczowe

EN

magnesium alloys; die-casting; high-pressure die casting

PL

stopy magnezu; odlewanie ciśnieniowe; odlewanie wysokociśnieniowe

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2008
• Tom: Vol. 8, iss. 1
• Strony: 27--30
• Opis fizyczny: Bibliogr. 14 poz., fot., tab., wykr.

Twórcy

autor

Błaszczyk-Malik K. N.

autor

Walczak W.

autor

Braszczyński J.

• Politechnika Częstochowska, Instytut Inżynierii Materiałowej, 42-200 Częstochowa, ul. Armii Krajowej 19,

Bibliografia

• [1] Mordike B.L., Ebert T.: Magnesium properties-applications-potential, Materials Science and Engineering A, 2001, Vol. 302, 37÷45
• [2] "Magnesium Alloys and Their Applications", WILEY-VCH, Edited by K.U. Kainer, 1998
• [3] "Magnesium Alloys and Their Applications", WILEY-VCH, Edited by K.U. Kainer, 2000
• [4] "Magnesium Alloys and Their Applications", WILEY-VCH, Edited by K.U. Kainer, 2003
• [5] Braszczyńska-Malik K.N., Studium kształtowania mikrostruktury stopów magnez-aluminium, Wyd. WIPMiFS PCz., Częstochowa, 2005 (in Polish)
• [6] Wu D.H., Chang M.S., Use of Taguchi method to develop a robust design for the magnesium alloy die casting process, Mater. Sc. Eng., A379 (2004) 366-371
• [7] El-Mahallawy N.A, Taha M.A., Pokora E., Klein F., On the influence of the process variables on the thermal conditions and properties of high pressure die-cast magnesium alloys, J. of Mater. Pro. Tech., 73 (1998) 125-138
• [8] Gutman E.M., Unigovski Y., Levkovich M., Koren Z., Aghion E., Dangur M., Influence of technological parameters of permanent mold casting and die casting on ceep and strength of Mg alloy AZ91D, Mater. Sc. And Eng., A234-236 (1997) 880-883
• [9] Dahle A.K., Sannes S., John D.H., Westengen H., Formation of defect bands in high pressure die cast magnesium alloys, J. Light Met., 1 (2001) 99-103
• [10] Vogel M., Kraft O., Dehm G., Arzt E., Quasi-crystalline grain-boundry phase in the magnesium die-cast alloy ZA85, Scrip. Mater., 45 (2001) 517-524
• [11] Unigovski Y.B., Butman E.M., Surface morphology of a die-cast Mg alloy, App. Sur. Sc., 153 (1999) 47-52
• [12] Tong K.S., Hu B.H., Niu X.P., Pinwill I., Cavity pressure measurements and process monitoring for magnesium die casting of a thin-wall hand-phone component to improve quality, J. of Mater. Proc. Tech., 127 (2002) 238-241
• [13] Balasundaram A., Gokhale A.M., Quantitative characterization of spatial arrangement of shrinkage and gas (air) pores in cast magnesium alloys, Mater. Char., 46 (2001) 419-426
• [14] Hydro Magnesium: Magnesium die casting, HM Technical Brochure, Hydro Media, 08, 2002