Nonlinear flexural analysis of laminated composite plates

• Autorzy: Pandey R. , Shukla K. K. , Jain A.
• Języki publikacji: EN

Abstrakty

EN

The paper presents an analytical-numerical solution of the nonlinear flexural response of the moderately thick laminated co-rectangular plates subjected to mechanical and thermo-mechanical loadings. It also investigates the effects of non-linear elastic supports on flexural response of laminated composite plates. The problem is formulated using higher order shear deformation theory (HSDT) and von Karman's nonlinearity. The governing nonlinear coupled partial differential equations are linearized utilizing quadratic extrapolation technique. The spatial descretisation of the linear differential equations is carried out using the fast converging finite double Chebyshev series. Numerical results depicting the central displacements and moments of laminated composite plates for different boundary conditions are presented. Effects of plate geometry, elastic foundation parameters, and temperature dependent mechanical and thermal properties of material on the flexural response are presented.

Słowa kluczowe

EN

laminated plate; nonlinear; HSDT; analytical solutions; Chebyshev series; elastic foundation

PL

płyta laminowana; struktura kompozytów

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2008
• Tom: Vol. 13, no 3
• Strony: 707--733
• Opis fizyczny: Bibliogr. 26 poz., wykr.

Twórcy

autor

Pandey R.

autor

Shukla K. K.

autor

Jain A.

• Department of Applied Mechanics MNNIT Allahabad-211004, INDIA,

Bibliografia

• Argyris J. and Tenek L. (1994): Linear and geometrically nonlinear bending of isotropic and multilayered composite plates by the natural mode method. - Comput Meth Appl Mech Eng., vol.113, pp.207-51.
• Bhaskar K. and Kaushik B. (2005): Analysis of clamped unsymmetric cross-ply rectangular plates by superposition of simple exact double fourier series solution. - Composite Structures, vol.68, pp.303-307.
• Ferreira A.J.M., Roque C.M.C. and Martins P.A.L.S. (2003): Analysis of composite plates using higher order shear deformation theory and a finite point formulation based on the multiquadric radial basis function method. - Composites, vol.34, pp.627-636.
• Fox L. and Parker I.B. (1966): Chebyshev polynomials in numerical analysis. - Oxford University Press, London.
• Gorgi M. (1986): On large deflection of symmetric composite plates under static loading. - Proc. Inst Mech Eng., vol.200, No.C1, pp.13-19.
• Gunay E. and Erdem A.U. (1997): A new heterosis plate element for geometrically non-linear finite element analysis of laminated plates. - Computers and Structures, vol.65, pp.819-828.
• Huai L.R. and Hui H.L. (1991): A simple theory for non-linear bending of laminated composite rectangular plates including higher- order effects. - Int. J. of Non-Linear Mechanics, vol.26, No.5, pp.537-545.
• Jones R.M. (2000): Mechanics of Composite Materials. - Taylor and Francis, Philadelphia.
• Kant T. and Kommineni J R. (1992): C0 finite element geometrically non-linear analysis of fibre reinforced composite and sandwich laminates based on a higher-order theory. - Comput. and Struct., vol.45, pp.511-520.
• Kant T. and Swaminathan K. (2002): Analytical solutions for the static analysis of laminated composite and sandwich plates based on a higher order refined theory. - Composite Structures, vol.56, pp.329-344.
• Lee S.J. and Reddy J.N. (2005): Non-linear response of laminated composite plates under thermomechanical loading. - Int. J. Non-Linear Mechanics, vol.40, No.7, pp.971-985.
• Malekzadeh P. and Farid M. (2007): A DQ large deformation analysis of composite plates on nonlinear elastic foundations. - Composite Structures, vol.79, No.2, pp.251-260.
• Malekzadeh P. and Setoodeh A.R. (2007): Large deformation analysis of moderately thick laminated plates on nonlinear elastic foundations by DQM. - Composite Structures, vol.80, No.4, pp.569-579.
• Nath Y., Prithviraju M. and Mufti A.A. (2006): Nonlinear statics and dynamics of anti-symmetric composite laminated square plates supported on nonlinear elastic subgrade. - Communications in Nonlinear Science and Numerical Simulation, vol.11, pp.340-354.
• Putcha N.S. and Reddy J.N. (1986): A refined mixed shear flexible finite element for the non-linear analysis of laminated plates. - Computers and Structures, vol.22, pp.529-538.
• Reddy J.N. (1984): A simple higher order theory for laminated composite plates. - J. of Applied Mechanics, ASME. vol.51, pp.745-752.
• Renganathan K., Rao N. and Manoj T. (2002): Moderately large deflection of laminated thin rectangular plates. - ZAMM, vol.5, pp.352-360.
• Shen H.S. (1999): Large deflection of composite laminated plates under transverse and in-plane loads and resting on elastic foundation. - Composite Structures, vol.45, pp.115-123.
• Shen H.S. (2000a): Nonlinear analysis of composite laminated thin plates subjected to lateral pressure and thermal loading and resting on elastic foundation. - Composite Structures, vol.49, pp.115-128.
• Shen H.S. (2000b): Nonlinear bending of shear deformable laminate under transverse and in-plane loads and resting on elastic foundations. - Composite Structures, vol.50, pp.131-142.
• Singh G., Rao G.V. and Iyengar N.G.R. (1994): Geometrically nonlinear flexural response characteristics of shear deformable unsymmetrically laminated plates. - Computers and Structures, vol.53, No.1, pp.69-81.
• Shukla K.K. and Nath Y. (2000): Non-linear analysis of moderately thick laminated rectangular plates. - J. of Engineering Mechanics, ASCE, vol.126, No.8, pp.831-838.
• Tanriover H. and Senocak E. (2004): Large deflection analysis of unsymmetrically laminated composite plates: Analytical-Numerical type approach. - Int. J. Non-Linear Mechanics, vol.39, No.8, pp.1385-1392.
• Wang X., Lu G. and Xiao D.G. (2002): Non-linear thermal buckling for local delamination near the surface of laminated cylindrical shell. - Int. J. Mechanical Sciences, vol.44, pp.947-965.
• Zenkour A.M. (2004): Analytical solution for bending of cross-ply laminated plates under thermo-mechanical loading. - Composite Structures, vol.65, No.3-4, pp.367-379.
• Zhang Y.X. and Kim K.S. (2006): Geometrically nonlinear analysis of laminated composite plates by two new displacement based quadrilateral plate elements. - Composite Structures, vol.72, No.3, pp.301-310.