Finite element heat transfer and structural analysis of a eone-eylinder pressure vessel

• Autorzy: Gorla R. S. R. , Haddad O.
• Języki publikacji: EN

Abstrakty

EN

Stress analysis of a cone-cylinder pressure vessel was computationaIly simulated by a finite element method and probabilisticaIly evaluated in view of several uncertainties in the performance parameters. Cumulative distribution functions and sensitivity factors were computed for overaIl heat transfer rate due to the structuraI and thermodynamic random variabIes. These results can be used to quickly identify the most critical design variabIes in order to optimize the design and make it cost effective. The analysis leads to the selection of the appropriate measurements to be used in structural and heat transfer analysis and to the identification of both the most criticaI measurements and parameters.

Słowa kluczowe

EN

heat transfer; probabilistic analysis; finite element analysis; cone-cylinder intersections

PL

przenoszenie ciepła; ciśnienie hydrostatyczne

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2007
• Tom: Vol. 12, no 3
• Strony: 599--608
• Opis fizyczny: Bibliogr. 8 poz., tab., wykr.

Twórcy

autor

Gorla R. S. R.

autor

Haddad O.

• Mechanical Engineering Cleveland State University Cleveland, OH 44115 U.S.,

Bibliografia

• Allaire P.E. (1985): Basics of the Finite Element Method. - W.C. Brown Publishers, Dubuque, IA.
• Anwen W. (1998): Stresses and stability for the cone-cylinder shells with toroidal transition. - Int. J. Pressure Vessels and Piping, vol.75, pp.49-56.
• Gabriel B. (1996): Behavior and Strength of Plate-end and Cone-end Pressure Vessels. - M.S. Thesis, James Cook University, Australia.
• Jones D.R.H. (1994): Buckling failure of pressurized vessels - two case studies. - Engineering Failure Analysis, vol.1, pp.155-167.
• Teng J.G. (1994): Cone-cylinder intersection under internal pressure: axisymmetric failure. - J. Engineering Mech. ASCE, vol.120, pp.1896-1912.
• Teng J.G. (1994): Elastic buckling of cone-cylinder intersection under localized circumferential compression. - Engineering Struct., vol.18, pp.41-48.
• Teng J.G. (1995): Cone-cylinder intersection under internal pressure: axisymmetric failure. - J. Engineering Mech. ASCE, vol.121, pp.1298-1305.
• Zhao Y. and Teng J.G. (2003): A stability proposal for cone-cylinder intersections under internal pressure. - Int. J. Pressure Vessel and Piping, vol.80, pp.297-309.