Dimensions and kinetics of local heat sources in rubbing solid contact

• Autorzy: Bogdanovich P. N. , Belov V. M. , Tkachuk D. V.
• Języki publikacji: EN

Abstrakty

EN

The paper describes the technique for studying the kinetics of thermal processes on real contact spots. Experimental results are presented. The effect of the load on the size distribution of hot spots (sources of heat radiation) is shown. The sliding velocity, surface topography and materials used are shown to influence the number, size, and life of the spots. The ratios of mean dimensions and total area of hot spots to those of the spots making up the real contact area are analyzed.

Słowa kluczowe

EN

friction; frictional heating; high-temperature

PL

tarcie; wysokie temperatury

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2006
• Tom: Vol. 11, no 1
• Strony: 5--13
• Opis fizyczny: Bibliogr. 15 poz., rys., wykr.

Twórcy

autor

Bogdanovich P. N.

autor

Belov V. M.

autor

Tkachuk D. V.

• Belarus State University of Transport 34 Kirov St., Gomel, 246653 BELARUS,

Bibliografia

• Archard J.P. and Rowntree R.A. (1988): The temperature of rubbing bodies. Part 2. The distribution of temperatures. - Wear, vol.128, No.1, pp.1-17.
• Blok H. (1937): Theoretical study of temperature rise at surfaces of actual contact under oiliness lubricating conditions. - Proc. Inst. Mech. Eng., vol.2, pp.222-235.
• Chichinadze A.V. (1967): Calculation and Investigation of External Friction in Braking. - Moscow: Nauka Publishers.
• Dow T.A. and Stockwell R.D. (1977): Experimental verification of thermoelastic instabilities in sliding contact. - Trans. ASME. Ser.F, vol.97, pp.359-364.
• Ghasemi H.M., Furey M.J. and Kajdas C. (1993): Surface temperatures and fretting corrosion of steel under conditions of fretting contact. - Wear, vol.162-164, No.1, pp.357-369.
• Korovchinskii M.V. (1966): Foundations of theory of thermal contact in local friction. - News in Friction Theory, No.3, pp.98-143.
• Kostetskii B.I. (1970): Friction, Lubrication, and Wear in Machines. - Kiev: Naukova Dumka.
• Kragelskii I.V., Dobychin M.N. and Kombalov V.S. (1982): Friction and Wear Calculation Methods. - Oxford: Pergamon Press.
• Kuhlmann-Wilsdorf D. (1987): Demystifying flash temperatures. Part 2. First-order approximation for plastic contact spots. - Materials Science and Engineering, vol.93, pp.119-133.
• Quinn T.F.G. and Winer W.O. (1987): An experimental study of the "hot-spots" occurring during the oxidational wear of tool steel on sapphire. - Trans. ASME. Journal of Tribology, No.2, pp.290-296.
• Schedrov V.S. (1965): The temperature on a sliding contact, In: Friction and Wear in Machines. - Moscow: USSR Academy of Sciences Publishers.
• Starchenko Yu.P., Movchun V.M. and Miletskii A.V. (1989): Regularities of thermal processes in friction of steel surfaces. - Soviet Journal of Friction and Wear, vol.10, No.2, pp.262-270.
• Sviridenok A.I., Chizhik S.A. and Petrokovets M.I. (1990): Mechanics of Discrete Friction Contact. - Minsk: Navuka I Tekhnika.
• Tkachuk D.V. and Bogdanovich P.N. (2004a): Temperature fields in a high-speed friction contact. - Tribologia, No.1, pp.75-89.
• Tkachuk D.V. and Bogdanovich P.N. (2004b): Thermal processes at high-speed friction. - International Journal of Applied Mechanics and Engineering, vol.9, pp.177-182.