The development of coolant recycling unit

• Autorzy: Raadnui S. , Timlerk P.
• Konferencja: Third International Conference on Engineering Rheology, ICER 2005
• Języki publikacji: EN

Abstrakty

EN

Ecological aspects are gaining in our society, bearing in mind that our environment is being increasingly contaminated with all kinds of pollutants, any reduction is welcome. From an environmental point of view and compared to a number of other chemical products, waste coolants have been one of the main sources of fresh and ground water contamination. Even though mineral based oil coolant products can be relatively and rapidly biodegraded by the microorganisms present in nature, these natural degrading systems are overwhelmed by the volume of the losses. Hence, the development of coolant recycling unit was proposed. The unit composes of three main subunits: Hydrocyclone, Pasteurizing and aeration unit. Preliminary performance of the unit was assessed and reported.

Słowa kluczowe

EN

coolant; recycling

PL

recykling; płyn chłodzący; recykling chłodziwa

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2005
• Tom: Vol. 10, no spec
• Strony: 279--284
• Opis fizyczny: Bibliogr. 3 poz., rys., wykr.

Twórcy

autor

Raadnui S.

• Department of Production Engineering, Faculty of Engineering King Mongkut's Institute of Technology North Bangkok 1518 Pibulsongkram Road, Bang-Sue, Bangkok, Postcode 10800, THAILAND

autor

Timlerk P.

• Department of Production Engineering, Faculty of Engineering King Mongkut's Institute of Technology North Bangkok 1518 Pibulsongkram Road, Bang-Sue, Bangkok, Postcode 10800, THAILAND

Bibliografia

• [1] Mang T., Dresel W. (2001): Lubricants and Lubrication. Federal Republic of Germany: Wiley-Vch GmbH, Weinheim.
• [2] Rubin D.B. (1992): Industrial lubricant recycling employing heat pasteurization and high speed centrifugation. – Lubrication Engineering, vol. 48, no. 8, pp. 626-631.
• [3] Schenach T.A. (1999): A simple process for the recycling of spent water-based metalworking fluids. – Lubrication Engineering, vol. 55, no. 2, pp. 12-22.