Palm oil based coolant for metal metalworking

• Autorzy: Raadnui S. , Mahathanabodee S.
• Konferencja: Third International Conference on Engineering Rheology, ICER 2005
• Języki publikacji: EN

Abstrakty

EN

Cutting oils and coolants are used to reduce friction and wear when cutting or forming metal. As well, they lubricate the cutting area, remove contaminants and prevent corrosion. There are two broad categories of conventional metalworking fluids: neat and water based. Neat cutting oils can be derived from animal, petroleum, vegetable or synthetic sources; however most are petroleum based. Having achieved success in Europe, vegetable oil based metal working oils are now being introduced in other parts of the world. This because vegetable oil cutting fluids are more environmental friendly, less of a health hazard, and superior in "boundary-condition" lubrication mode, they could become the based oil of choice for coolant formation. In this work, the performance of palm oil based coolant was evaluated in comparison with the reference commercial coolants. The aim of the test was to evaluate mineral and palm oil based coolants characteristics. In addition of specific combinations of function formulae, work piece quality and tool wear were compared.

Słowa kluczowe

EN

coolant; metalworking; palm oil

PL

obróbka metali; płyn chłodzący; olej palmowy

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2005
• Tom: Vol. 10, no spec
• Strony: 273--278
• Opis fizyczny: Bibliogr. 4 poz., rys., tab.

Twórcy

autor

Raadnui S.

• Department of Production Engineering, Faculty of Engineering King Mongkut's Institute of Technology North Bangkok 1518 Pibulsongkram Road, Bang-Sue, Bangkok, Postcode 10800, THAILAND

autor

Mahathanabodee S.

• Department of Production Engineering, Faculty of Engineering King Mongkut's Institute of Technology North Bangkok 1518 Pibulsongkram Road, Bang-Sue, Bangkok, Postcode 10800, THAILAND

Bibliografia

• [1] Belluco W., De Chiffre L. (2001): Testing of vegetable-based cutting fluids by hole making operations. – Lubrication Engineering, vol. 1, no 8, pp. 12-16.
• [2] John J., Bhattacharaya M., Raynor P.C. (2004): Emulsions containing vegetable oils for cutting fluid application. – Journal of Colloids and Surfaces A: Physiochem. Eng. Aspects, vol. 237, pp. 141-150.
• [3] Mang T., Dresel W (2001): Lubricants and Lubrication. – Federal Republic of Germany: Wiley-Vch GmbH, Weinheim.
• [4] Upton D.P. (2000): Optimization of cutting fluid performance. – Int. J. Prod. Res., vol. 38, no. 5, pp. 1219-1223.