Computer simulation of fluid flow and heat transfer in strip casting of aluminum alloys

• Autorzy: Kuznetsov A. V.
• Języki publikacji: EN

Abstrakty

EN

In this study, results of numerical analysis of the continuous casting process aimed for a production of thin aluminum-copper strips are reported. A characteristic feature of the continuous casting process considered in this paper is a strong forced convection of liquid alloy caused by a changing height of a free surface. Computations are performed for Al-4.5 wt pct Cu alloy. In this investigation, heat transfer process is coupled with the fluid flow which occurs in the liquid metal and in the mushy zone. It is shown that there is an essential forced convection flow in the upper part of mushy zone between the position where the liquidus line reaches the free surface and the position where the height of the free surface reaches its maximum. This flow can cause a destruction of the dendritic structure which in its turn can be one of the reasons for instability of the process.

Słowa kluczowe

EN

strip casting; heat and fluid flow; mathematical modelling

PL

hydromechanika

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: Applied Mechanics and Engineering
• Rocznik: 1998
• Tom: Vol. 3, no 3
• Strony: 479--490
• Opis fizyczny: Bibliogr. 11 poz., rys., wykr.

Twórcy

autor

Kuznetsov A. V.

• Department of Mechanical and Aerospace Engineering Noth Carolina State University, Raleigh, NC 27695-7910, USA