Analysis of tribological wear of the elements with unconventional two-component sliding surface

• Autorzy: Łunarski J. , Sęp J.
• Konferencja: Problems of Non-Conventional Bearing Systems, NCBS '99
• Języki publikacji: EN

Abstrakty

EN

The paper presents results of the tests concerning tribological wear of sliding elements provided with two-component steel-copper surface layer. It has been found that tribological wear of the specimens, which surface were modified with copper, as compared to plain ground specimens was reduced by 83,5% in the case of concentrated contact and by 72% in the case of distributed contact. Furthermore it has been found that after tribological tests there are differences in chemical composition of specimen surface layer depending on particular machining condition.

Słowa kluczowe

EN

two-component surface layer; friction; tribological wear; copper

PL

trybologia

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: Applied Mechanics and Engineering
• Rocznik: 1999
• Tom: Vol. 4, no spec.
• Strony: 147--151
• Opis fizyczny: Bibliogr. 7 poz., tab., wykr.

Twórcy

autor

Łunarski J.

autor

Sęp J.

• Rzeszów Technical University, ul. W. Pola 2, 35-959 Rzeszów, POLAND