Friction behavior of aluminum alloy 3004 sheets in ironing process

• Autorzy: Dohda K. , Wang Z.
• Konferencja: Problems of Non-Conventional Bearing Systems, NCBS '99
• Języki publikacji: EN

Abstrakty

EN

The purpose of this research is to investigate the effect of, ?, the angle between the ironing direction and the rolling direction of the rolled sheets, on the friction behavior in the ironing process of aluminum alloy 3004 sheets under various frictional conditions by changing the viscosity of lubricant, the thickness of lubricant film, working velocity etc.. Experiments showed that the difference in the friction coefficient due to? becomes smaller with increasing viscosity of the lubricant/working velocity or decreasing surface roughness of the rolled sheet. For the lowest viscosity of lubricant in the present experiment, the friction coefficient for ?=0° is about 3 times of the friction coefficient for ?=90°.

Słowa kluczowe

EN

tribology; ironing; aluminium alloy; friction coefficient; can body fracture

PL

trybologia

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: Applied Mechanics and Engineering
• Rocznik: 1999
• Tom: Vol. 4, no spec.
• Strony: 133--138
• Opis fizyczny: Bibliogr. 2 poz., rys., wykr.

Twórcy

autor

Dohda K.

autor

Wang Z.

• Department of Mechanical Systems Engineering, Gifu University, 1-1 Yanagido, Gifu, JAPAN