Friction and wear of phenilon filled by ultra-dispersed oxynitride of silicon-yttrium

• Autorzy: Burya A. I. , Arlamova N. T.
• Konferencja: Problems of Non-Conventional Bearing Systems, NCBS '99
• Języki publikacji: EN

Abstrakty

EN

The possibility of ultradispersed nitride-silicon compounds` application as the fillers for improving tribotechnical and phisico-mechanical characterisics of heat-resistant polymer materials has been studied. The efficacy of applying such fillers is based on the formation of composite`s specific supermolecular structure. It is the low contents of the mentioned fillers that is stressed to make the positive effect. As for the friction, the presence of two minima in 0,2 and 5 mass.% contents of the filler is found both in case of dinamic and static coefficients of friction. The greatest changes in tribotechnical and other physico-mechanical criteria are proved to occur at such contents of the filler.The results cited at the article testify to the correlation between the resistance to wear and physico-mechanical characteristics.

Słowa kluczowe

EN

phenilon; filler; composite; friction; resistance to wear

PL

kompozyty

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: Applied Mechanics and Engineering
• Rocznik: 1999
• Tom: Vol. 4, no spec.
• Strony: 115--120
• Opis fizyczny: Bibliogr. 13 poz., rys., tab., wykr.

Twórcy

autor

Burya A. I.

autor

Arlamova N. T.

• Chemistry Dept., State Agrarian University, 25,Voroshilov St., 320027 Dniepropetrovsk UKRAINE