The new cooling lubricating liquid used during cutting of steel

• Autorzy: Pytko P. , Pytko S.
• Konferencja: Third International Tribology Conference ITC 2004
• Języki publikacji: EN

Abstrakty

EN

The authors have been proposing for cutting processes the special cooling-lubricating liquids that my be applied in finishing processes. Proposed liquids are based on versenian complexes of metals i.e. Cu, Zn, Cr, Mo and athers. Water is used as the carrier of a/m complexes and other addetives. In cutting process with such liquids used the components of uncovered steel surface do react with metal solution complexes resulting in formation of metal coating (i.e.Cu) on machined surface. The coating my serve as: substrate layer for another process e.g. electrolic chromium,corrosion protection or decorativ layer, a barrier against surface decarbonization in case hardening.

Słowa kluczowe

EN

cutting process; surface layer formation; coatings; new technology; cooling-lubricating

PL

wytrzymałość materiałów; chłodzenie; smarowanie; cięcie; warstwa powierzchniowa

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2004
• Tom: Vol. 9, no. spec.
• Strony: 255--262
• Opis fizyczny: Bibliogr. 7 poz., rys., tab., wykr.

Twórcy

autor

Pytko P.

• AGH, University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, POLAND

autor

Pytko S.

• AGH, University of Science and Technology, Al. Mickiewicza 30, 30-059 Kraków, POLAND

Bibliografia

• [1] Hlebanja J. (1990): Applocability of TiN coated cutting tools for wood. - Proceedings of Japan International Tribology Conference, Nagoya, 1990.
• [2] Marzec S. (1995): Properties of copper layers formed from liquid in turning process. - Problems of Machltl Exploitation, vol.3, No. 103 (in Polish).
• [3] Marzec S., Pytko S. and Zochniak A. (1995): Receiving cooling medium enriching the work surface of metals dun machining. - Pat. Nr. 167431, Warszawa 1995 (in Polish).
• [4] Pytko S. (1989): Problems of a lubrication during a machining. - Mechanic, No.9, pp.401-406 (in Polish).
• [5] Pytko S. (1989): Basis of Tribology and Lubrication. - Manuscript, Krakow: Technical University of Mining Metallurgy (in Polish).
• [6] Pytko S. and Marzec S. (1995): Evaluating of the tribology properties of a liquid based on the copper and nickel complex. - Tribologia, No.4 (in Polish).
• [7] Usi E. and Shirakashi T. (1985): Analitical predicition of cutting tool. - Wear, Celebration, vol. 100.