Simulation of the sheet-metal forming process with changeable holding force and different frictional resistance

• Autorzy: Adamus J.
• Konferencja: Third International Tribology Conference ITC 2004
• Języki publikacji: EN

Abstrakty

EN

In the paper numerical simulation results of the sheet-metal forming process have been presented. A square drawpiece made of aluminium sheet has been considered. The influence of changeable holding force on the course of the process has been taken into consideration.

Słowa kluczowe

EN

numerical simulation; sheet-metal forming; friction; holding force

PL

wytrzymałość materiałów; symulacja numeryczna; tarcie; blacha

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2004
• Tom: Vol. 9, no spec.
• Strony: 241--246
• Opis fizyczny: Bibliogr. 7 poz., rys., tab., wykr.

Twórcy

autor

Adamus J.

• Częstochowa University of Technology Institute of Metal Working, Quality Engineering and Bioengineering al. Armii Krajowej 21, 42-200 Częstochowa, POLAND

Bibliografia

• [1] Adamus J. (1998): The influence of friction and lubrication on the formability of steel sheet and galvanized steel sheet during sheet metal-forming process - Doctor’s Dissertation, Czqstochowa University of Technology, Poland.
• [2] Adamus J. (2003): Application of the antiwear layers on the stamping tools. - Tribology, No.4, vol.190, pp. 11-21.
• [3] Adamus J. (2004): Some problems of shaping the aluminium drawpieces. - XVI International Scientific and Technological Conference „Design and Technology of Drawpieces and Die Stamping”, Poznan-Wąsowo, June 14-16, p.137-144.
• [4] Adamus J. and Chmielowiec P. (2003): Tests of the aluminium sheet properties in higher temperature. - X Jubilee Conference FORMING’03, Podlesice k/Kroczyc, Poland.
• [5] Gierzyńska-Dolna M. (1983): Friction, wear and lubrication in metal forming. - Warszawa: WNT.
• [6] Marciniak Z. (2002): Construction of the press tools. - Technical Centre A.Marciniak Sp.z o.o., Warszawa, Poland.
• [7] Optris V. 2000 (6.1), ESI Group/Dynamic Software, France.