Lubricity of oils used in porous bearings

• Autorzy: Król A. , Kałdoński T.
• Konferencja: Third International Conference ITC 2004
• Języki publikacji: EN

Abstrakty

EN

The authors of the article discussed acting of oil in the porous bearing and noticed that complex of suitable properties of oil could decide about correct operating of the bearing. In the article one also presented results of preliminary investigations of porous bearings and of oils showing that there were other essential properties of oils such as lubricity and permeability. The authors concluded that there is need to design new rules of oil selection for porous bearings.

Słowa kluczowe

EN

porous bearings; lubricity; self-lubrication; oil; porosity; permeability; selection

PL

smarowanie; łożysko; olej

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2004
• Tom: Vol. 9, no spec.
• Strony: 153--159
• Opis fizyczny: Bibliogr. 13 poz., rys., tab., wykr.

Twórcy

autor

Król A.

• Military University of Technology, Faculty of Mechanics, Department of Engine Fuels and Lubricants

autor

Kałdoński T.

• Military University of Technology, Faculty of Mechanics, Department of Engine Fuels and Lubricants

Bibliografia

• [1] Capone E„ Niola V. and Bocchini G.F. (1980): Further developments in porous bearing technology: the 20 step permeability bearing. - Tribology International, December 1980, pp.294-296.
• [2] Kałdoński T. (1997): Complexity of self-lubricating mechanism of porous bearing - two models. - Tribology, No.5-6, pp.653-657.
• [3] Król A.. and Kałdoński T. (1999): Investigations of porous bearings at shaft variable rotation direction. - Proceedings ! of the International Conference: Problems of Non-Conventional Bearing Systems NCBS’99, Zielona Góra, I September 15-18, Applied Mechanics and Engineering, 1999, vol.4, Special issue: NCBS’99, pp.45-50.
• [4] Król A. and Kałdoński T. (2002): Permeability of porous sliding bearings. - Proceedings of Second International I Tribology Conference, SITC 2002, Zielona Góra, August 25-28, International Journal of Applied Mechanics and Engineering, Special issue: “SITC 2002”, vol.7, pp.255-262.
• [5] Krzemiński K. (1976): Influence of anisotropy of porous sleeve on functional properties of sliding bearings. - f Mechanical Review, No.22, pp.767-770.
• [6] Krzemiński K. (1978): Analysis of resistance to motion in porous sliding bearings. - The Archive of Mechanical Engineering, No.4, pp.646-655.
• [7] Krzemiński K. (1979): Motional properties of self-lubricating porous bearings used in motor industry. - Mechanical ; Review, No.5, pp.14-18.
• [8] Krzemiński K. (1985): Motional properties of self-lubricating porous bearings used in motor industry. - Mechanical Review, No.7, pp.10-13.
• [9] Krzemiński K. (2000): Change of microstructure of porous sleeve during running in process. - Scientific Works of Fuculty of Materials Science of Radom University of Technology, Radom, pp.96-102.
• [10] Lawrowski Z. (1962): Self-lubricating mechanism of porous bearings on example porous steel. - Mechanical Review, I No.22, pp.691-696.
• [11] Moshkow A.D. (1962): Friction and Wear of Porous Metal-Ceramic Materials. - Tashkent.
• [12] Olexa J. (1980): Investigation of the relations between the permeability and the service life of porous self-lubricated I bearings. - Wear, No.58, pp. 1-14.
• [13] Zozulia W. D. (1976): Lubricants for Self-Lubricated Bearings. - Kijów: Scientific Council.