Surface layer transformation under external extortions

• Autorzy: Musiał J. , Styp-Rekowski M.
• Konferencja: Third International Conference ITC 2004
• Języki publikacji: EN

Abstrakty

EN

In presented paper the considerations relating to the choice of input factors to tribologic system as well as quantities which were accepted as measure of changes of surface layer (SL) state. The results of experimental investigations were also introduced. On the ground of them the rightness of choice was verified. Conducted analytic and experimental investigations permitted on qualification of influence of chosen factors on intensity of wear process of rolling bearings elements. As object of investigations the angular ball bearings were accepted. For assumed object of investigations the independent variables set was as follows: the amplitude of pressures in contact area of balls and raceways, the frequency of variable load. Changes were recorded in real-time. Recorded changes were described by mathematical models. The conducted investigations permitted also on formulation of the several conclusions, which can to be of useful in all stages of machine existence.

Słowa kluczowe

EN

surface layer; rolling bearing; transformation of SL

PL

warstwa powierzchniowa; łożysko toczne; zużycie części

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2004
• Tom: Vol. 9, no spec.
• Strony: 123--128
• Opis fizyczny: Bibliogr. 5 poz., rys., tab., wykr.

Twórcy

autor

Musiał J.

• Technical and Agricultural University, Mechanical Engineering Faculty Prof. S. Kaliski Av. 7, 85-796 Bydgoszcz, POLAND

autor

Styp-Rekowski M.

• Technical and Agricultural University, Mechanical Engineering Faculty Prof. S. Kaliski Av. 7, 85-796 Bydgoszcz, POLAND

Bibliografia

• [1] Burakowski T. and Marczak R. (1999): Selected processes of service generated layer constitution. - Tribologia, vol.30, No 6, pp.757-765 (in Polish).
• [2] Burakowski T. and Wierzchon T. (1995): Engineering of Surface of Metals. Warszawa: WNT (in Polish).
• [3] Musiał J. (2001): Influence of transformation course of technological surface layer into service generated one on functional features of rolling bearings. - Proceedings of IX Congress of Maintenance of Technical Device Krynica, pp.109-115 (in Polish).
• [4] Musiał J. (2003): Investigations of Influence of Some External Loading in Relation to Geometry of Functional Surfaces of Rolling Bearings. - Doctor’s dissertation, Technical and Agricultural University, Bydgoszcz (in Polish).
• [5] Styp-Rekowski M. and Musiał J. (2000): Transformation of technological surface layer into service generated layer in kinematic pair with rolling friction. - Problems of Terotechnology, vol.l 1, No.3, pp.241-248 (in Polish).