PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Influence of atmospheric gas upon seizure of gas bearings

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Konferencja
Third International Tribology Conference ITC 2004
Języki publikacji
EN
Abstrakty
EN
In this paper the influences of atmospheric gas such as oxygen or argon upon seizure are investigated. The hydrostatic journal bearings are used as a test apparatus. Oxygen and argon were used as a lubricant in bearing test process. Bronze bearings finished by lapping are used under the combination with steel shafts finished by honing. It was clarified that the process of gas makes an important role for frictional force, origin of debris and the seizure. On the other hand, plastic deformation of the asperities of surface roughness by rubbing action seemed to be a main reason for seizure of similar materials of steel. The surface finishing influences upon the origin of debris and the seizure superior to atmospheric gas.
Słowa kluczowe
Rocznik
Strony
105--109
Opis fizyczny
Bibliogr. 4 poz., rys., tab., wykr.
Twórcy
autor
  • Department of Mechanical Engineering, Saitama University 255 Shimo-Okubo, Sakura-ward, Saitama-city, 338-8570, JAPAN
autor
  • Department of Mechanical Engineering, Saitama University 255 Shimo-Okubo, Sakura-ward, Saitama-city, 338-8570, JAPAN
autor
  • Department of Mechanical Engineering, Saitama University 255 Shimo-Okubo, Sakura-ward, Saitama-city, 338-8570, JAPAN
autor
  • Department of Mechanical Engineering, Saitama University 255 Shimo-Okubo, Sakura-ward, Saitama-city, 338-8570, JAPAN
Bibliografia
  • [1] Harada M., Tsukazaki J., Yamamoto H. (2002): Influence of Surface upon seizure of bearings. – Int. J. of Applied Mechanics and Engineering, vol. 7, Special issue: SITC 2002, pp. 133-138.
  • [2] Mishina H., Sasada T (1984): Mechanism of seizure. – J. JSLE, vol. 29. No. 10, pp. 769-774.
  • [3] Sasada T., Kando H. (1972): Formation of wear particles by the mutual transfer and growth process. – J. jsle, vol. 17, no. 2, pp. 96-101.
  • [4] Soda N., Sasada T. (1978): J. Lubr. Technol., vol. 100, pp. 492-500.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ2-0008-0015
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.