An integrated approach condition monitoring of grease-lubricated rolling element bearings

• Autorzy: Raadnui S.
• Konferencja: Third International Tribology Conference ITC 2004
• Języki publikacji: EN

Abstrakty

EN

In this particular paper, the correlation of noise level, used grease analysis and worn surface assessment was carried out. An experimental test rig consists of tested rolling element bearing driven by an electric motor was set up to examine the correlation between the three techniques under various bearing "severity" conditions. Noise signals were collected regularly. Used grease wear debris and contaminant analysis was performed. In addition, worn surfaces were examined. Fault detection in the noise signatures were compared with the used grease debris analysis and worn surface analysis results.

Słowa kluczowe

EN

rolling element bearing; condition monitoring

PL

łożysko toczne; zużycie powierzchni; smar

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2004
• Tom: Vol. 9, no spec.
• Strony: 93--98
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Raadnui S.

• Machinery Health Monitoring and Tribology Labolatory Department of Production Engineering, Faculty of Engineering King Mongkut's Institute of Technology North Bangkok (KMITNB) 1518 Pibulsongkram Road, Bang-Sue, 10800, Bangkok, THAILAND

Bibliografia

• [1] Tandon N., Nakra B. C. (1992): Comparison of vibration and acoustic measurement techniques for the condition monitoring of rolling element bearing. – Tribology International Journal, Vol. 25, no. 3, pp. 205-212.
• [2] Kimura Y. (1997): Maintenance tribology: its significance and activity in Japan. – Wear Journal, Vol. 207, pp.63-66.
• [3] KOYO (1980): Ball and Roller Bearings. – General Catalog no. 210E Japan.
• [4] SKF (1977): bearing Maintenance and Replacement Guide. – Catalog 3014 E/GB 677, England: Jarrold Printing.
• [5] NSK (1989): Rolling Bearing. Printing no. A140, Japan.
• [6] NTN (1999): Rolling Bearing Maintenance and Cares. – Japan.