The study of thermal processes as a basis for quality production of tools of low-alloy high-speed steels

• Autorzy: Jaworski J.
• Języki publikacji: EN

Abstrakty

EN

In the paper, the range of application of tools made of low-alloy high speed steels has been determined on the basis of the investigation of the temperature field distribution in the cutting edge, hardness measurement of the cutting edge, the hot hardness and the assumed systematisation of wear causes. The most effective surface treatment methods have been proposed.

Słowa kluczowe

EN

high-speed steel; hot hardness; temperability; durability

PL

stal szybkotnąca; hartowność; trwałość

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2004
• Tom: Vol. 9, no 3
• Strony: 493--503
• Opis fizyczny: Bibliogr. 14 poz., tab., wykr.

Twórcy

autor

Jaworski J.

• Technical University of Rzeszów Department of Mechanical Engineering and Production Organization Ul. W. Pola 2, 35-959 Rzeszów, POLAND

Bibliografia

• [1] Berkowski L. (1994): Wrought high-speed steels. - Poznań: IOP (in Polish).
• [2] Dobrzański L., Hajduczek E., Marciniak J. and Nowosielski R. (1999): Heat Treatment of Tool Materials. - University Sub-literature, No. 11390, Gliwice (in Polish).
• [3] Geller J.A. (1983): Tool Steels. - Moscow: Metallurgy (in Russian).
• [4] Helman P. (1997): High-speed Steels ASP. Properties and Application Possibilities. - Warsaw: Stora Kopparberg.
• [5] Jaworski J. (2001a): Influence of temperature factor on cutting edge durability in the tool made of low-alloy high-speed steels. IV National Scientific and Technical Conference PROGRESS, Cracow, October 25-26,2001, pp.85-92 (in Polish).
• [6] Jaworski J. (2001b): lnvestigation of temperature influence on hardness decrease in low-alloy high speed Steel. - Acta Mctallurgia Slovaca, vol.7, No.3, pp. 178-182.
• [7] Jaworski J. (2000): Possibilities of better use and development of tools made of low-alloy high speed steels. - Mechanical Review, No.21-22, pp.34-36.
• [8] Paśko R., Przybylski L. and Słodki B. (2001): High speed cutting-effective way of machining. - IV National Scientific and Technical Conference PROGRESS, Cracow, October 25-26, 2001, pp.187-195 (in Polish).
• [9] Sinopalnikov V.A. and Gurin V.D. (1977): Distribution of temperaturę in the zonę of cutting edge of tool made of high- speed Steel. - Vestnik Maszinostrojenija, No.l, pp.51-54.
• [10] Sinopalnikov V.A. (1976): Some Problems of Increasing in Durability of Tools Made of High-speed Steel. High- productivity Designs of Cutting Tools. - Moscow: MDNTN.
• [11] Wasin S.A., Wereszczaka A.S. and Kusznier W.S. (2001): Metal Cutting. - Moscow: MGTU.
• [12] Wereszczaka A.S. and Tretjakow J.P. (1986): Cutting Tools with Wear-resistant Coatings. - Moscow: Maszinostrojenije.
• [13] Wolańczyk F. (1998): Definition of thermal properties of low-alloy high-speed steels SW7M and SW3S2, In: Proceedings of the International Scientific Conference “Mechanics ‘98” (M. Korzyński, Ed.). - Rzeszów, June 28- «), 1998, pp.453-460.
• [14] Wysiecki M. (1997): Modern Tool Materials. - Warsaw: WNT.