The steady-state response analysis of flexible-coupling-rotor system

• Autorzy: Hsieh S.C. , Lee A.C. , Chen J.H.
• Języki publikacji: EN

Abstrakty

EN

In this paper, a modeling procedure is presented to deal with the steady-state analysis of rotor systems with rubber cushion-type flexible couplings. The rubber cushion-type flexible coupling was modeled by an equivalent spring and the effect of misalignment was investigated. Moreover, we introduce the flexible coupling model in combination with the FEM model of rotating shafts to develop a complete formulation of a coupling-rotor system. Finally, to illustrate the effects of the coupling misalignments on the dynamic behavior of the system, numerical examples of this coupling-rotor system are presented.

Słowa kluczowe

EN

rubber cushion; flexible coupling; misalignment; rotor

PL

mechanika; wirnik; sprzęgło elastyczne

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2004
• Tom: Vol. 9, no 2
• Strony: 307--324
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Hsieh S.C.

• Department of Mechanical Engineering, National Chiao Tung University 1001 Ta Hsueh Road, Hsinchu 30049, TAIWAN, R.O.C.

autor

Lee A.C.

• Department of Mechanical Engineering, National Chiao Tung University 1001 Ta Hsueh Road, Hsinchu 30049, TAIWAN, R.O.C.

autor

Chen J.H.

• Department of Mechanical Engineering Chung Hua University TAIWAN, R.O.C.

Bibliografia

• [1] Brosens P.J. and Crandall S.H. (1961): Whirling of unsymmetric rotor. - ASME Journal of Applied Mechanics, Sepember 1961, pp.355-362.
• [2] Faires V.M. (1965): Design of Machine Elements. - New York: Macmillan.
• [3] Hindhede U., Zimmerman J.R., Hopkins R.B., Erisman R.J., Hull W.C. and Lang J.D. (1983): Machine Design Fundamentals. - New York: Wiley.
• [4] Iwatsubo T. and Saigo M. (1984): Transverse vibration of rotor system driven by a cardan joint. - Journal of Sound and Vibration, vol.95, pp.9-18.
• [5] Kang Y., Shih Y.P. and Lee A.C. (1992): Investigation on the steady-state responses of asymmetric rotors. - ASME Journal of Vibration and Acoustics, April 1992, vol.114, pp.194-208.
• [6] Nelson H.D. (1980): A finite rotating shaft element using timoshenko beam theory. - Journal of Mechanical Design, vol. 102, pp.793-803.
• [7] Nelson H.D. and McVaugh J.M. (1976): The dynamics of rotor-bearing systems using finite elements. - ASME Journal of Engineering for Industry, May 1976, vol.98, No.2, pp.593-600.
• [8] Sheu P.P., Chieng W.H. and Lee A.C. (1996): Modeling and analysis of the intermediate shaft between two universal joints. - ASME Journal of Vibration and Acoustics, January 1996, vol. 118, pp.88-89.
• [9] Timoshenko S. and Gere J. (1997): Mechanics of Materials. - Boston: PWS Pub. Co.
• [10] Yamamoto T. and Ota H. (1964): On unstable vibrations of a shaft carrying an unsymmetrical rotor. - ASME Journal of Applied Mechanics, September 1964, pp.515-522.
• [11] Yamamoto T., Ota H. and Kono K. (1968): On the unstable vibrations of a shaft with unsymmetrical stiffness carrying an unsymmetrical rotor. - ASME Journal of Applied Mechanics, June 1968, pp.313-321.