Palm oil-based grease tribological characteristics

• Autorzy: Raadnui S.
• Konferencja: Second International Conference on Engineering Rheology ICER 2003
• Języki publikacji: EN

Abstrakty

EN

The pressure for increased use of vegetable oils in lubricants, due to both environmental and health and safety considerations, is likely to continue. In addition, economic trends are likely to make vegetable oils increasingly more attractive than in the past in many areas of the globe. All these factors will probably result in an increase use of vegetable oil as lubricants. In this work, systematic research on palm oil-based grease tribological characteristics assessment will be carried out.

Słowa kluczowe

EN

vegetable grease; tribological characteristics

PL

olej roślinny; trybologia

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2003
• Tom: Vol. 8, no. spec.
• Strony: 103--108
• Opis fizyczny: Bibliogr. 7 poz., rys., tab., wykr.

Twórcy

autor

Raadnui S.

• Department of Production Engineering, Faculty of Engineering King Mongkut's Institute of Technology North Bangkok 1518 Pibulsongkram Road, Dusit, 10800, THAILAND

Bibliografia

• [1] ASTM D-2266-91 (1991): Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method), vol.05.01, Petroleum Products and Lubricants (I): D 56 - D 2596.
• [2] ASTM D-2270-93 (1993): Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100°cy vol.05.01, Petroleum Products and Lubricants (I): D 56 - D 2596.
• [3] ASTM D-445-94 (1994): Test Method for Kinematic Viscosity of Transparent and Opaque Liquids, vol.05.01, Petroleum Products and Lubricants (I): D 56 - D 2596.
• [4] ASTM D-6078-97 (1997): Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on- Cylinder Lubricity Evaluator (SLBOCLE), vol.05.02, Petroleum Products and Lubricants (II): D 2597 - D 5357.
• [5] Molier U.J. and Boor U. (1986): Lubricants in Operation. - London: Mechanical Engineering Publications Limited.
• [6] Mortier R.M. and Orszulik S.T. (1997): Chemistry and Technology of Lubricants. - Suffolk: St. Edmundsbury Press.
• [7] Pirro D.M. and Wessol A.A. (2001): Lubrication Fundamentals. - New York: Marcel Dekker, Inc.