Rheological behavior of polymer used in drilling fluid

• Autorzy: Daimallah A. , Kherfellah N. , Benhadid S.
• Konferencja: Second International Conference on Engineering Rheology ICER 2003
• Języki publikacji: EN

Abstrakty

EN

Drilling fluids perform a role of an interest of age for the good progress of drilling operations. They are exceedingly complex. Their rheological behavior are influenced by the high temperatures and the miscellaneous exterior coercion, where it's necessary to characterize their behavior for a better acquaintance from their rheological properties. Generally, they are adjusted by the addition of polymers and chemical additives in their formulations. The aim of our study is to characterize the rheological behavior of polymer used in drilling fluids with varying numerous factors (high temperatures, different concentrations of polymer).

Słowa kluczowe

EN

rheology; model; behavior; polymer; non-Newtonian fluid

PL

polimery; reologia; ciecz nienewtonowska

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2003
• Tom: Vol. 8, no spec.
• Strony: 19--24
• Opis fizyczny: Bibliogr. 19 poz., wykr.

Twórcy

autor

Daimallah A.

• Laboratory of Rheology, Faculty of Physics, USTHB B.P. 32 El Alia, Alger 16111, ALGERIA

autor

Kherfellah N.

• Research and Development Centre 1, Av, 1er Novembre, 35000 Boumerdes, Sonatrach, ALGERIA

autor

Benhadid S.

• Laboratory of Rheology, faculty of Physics USTHB B.P. 32 El Alia, Alger 16111, ALGERIA

Bibliografia

• [1] Bekkour K., Em H. and Lounis M., (2001): Caracterisation H/E et de suspensions de bentonite. - XVeme Congres Franęais en Mecaniąue, September 3-7, Nancy, France.
• [2] Benhadid S. (1987): Rheologie des Ecoulements Sanguins: Approches et - These, Unstitut National Polytechniąue de Lorraine, France.
• [3] Berthier P. (1992): Modelisation du Comportement Rheologią de Fluides de Forage en Regime Stationnaire et Instationnaire. - These, France: Paris VII.
• [4] Boumahrat M. and Gourdin A. (1993): Methodes Numeriąues - OPU, Algerie.
• [5] Courraze G. and Grossiord J.L. (1991): Initiation a la rheologie. - Technip et Documentation, Lavoisier, France, Second Edition.
• [6] Cross M.M. (1965): Rheology of non-Newtonianfluids:a new flow equation for pseudo-plastic systems. - J Colloid Sci vol.20, pp.417-437.
• [7] Dubois I. (1999): Relation Structure/Proprietes D’amidons Modifies: Application a la Formulation de Fluides de Forage Non Ppolluants. - These, Universite de Rouen.
• [8] Einstein A. (1906): Am. Phys., pp.19-289.
• [9] Einstein A. (1911): Eine neue Bestimung der Molekiil-dimensionen - Am. Phys., pp.34-591.
• [10] Krieger I.M. and Daugherty T.J. (1959): A mechanism of non-Newtonian flow in suspensions of rigid spheres. - Transact. Soc. Rheology, vol.3, pp. 137-152.
• [11] Lecourtier J. and Degouy D. (1994): Relation between structure and effeciency of polymeric - Revue de 1’Institut Franęais du Petrole, vol.49, No.2, pp.177-186.
• [12] Mooney M. (1951): The viscosity of concentrated suspension of spherical particles. - J. Colloid Sci., vol.6, pp.162-170.
• [13] Muller G. (1990): Polymeres hydrosolubles d’origine naturelle et - Revue de 1’Institut Franęais du Petrole vol.45, No.6, pp.703-717.
• [14] Quemada D. (1978): Rheology of a concentrated disperse systems. II: A model for a non newtonian shear viscosity in steady flow. - Rheol. Acta, vol,17, pp.632-642.
• [15] Regis J. (1998): Mecaniąue des Fluides Appliquee. - Edition Marketing S.A., France.
• [16] Singiresu S. Rao (1996): Engineering Optimization. - Indiana, U.S.: Wiley-Interscience Publication, Third Edition.
• [17] Steve Y., M-I L.L.C., Toon M., Noviant B.V. and Nijmegen (2001): Novel Polymer Chemistry Increases Shale Stability. - AADE 01 -NC-HO-41.
• [18] Strickland S.D. (1994): Polymer Drilling Fluid in the 1990’s: Will they replace oil-based mud? - SPE 29211, pp.691-692.
• [19] Williams M.C. (1966): A. I. Ch. E. J„ vol,12, p.1064.