The friction and wear characteristics and the deformation of bronze powder-filled PEEK/PTFE blends in oscillating motion

• Autorzy: Takahashi H. , Saito A.
• Konferencja: Second International Tribology Conference
• Języki publikacji: EN

Abstrakty

EN

A study was made on polymer based composite materials, which are usable without lubrication as sliding members of oscillating motion components which are difficult to lubricate with oil. In this study, polyetheretherketone (PEEK) was used as a matrix, was blend with polytetrafluoroethylene (PTFE) which is a friction-reducing material. Friction and wear characteristics of each specimen in oscillating motion and continuous rotation were studied. As a result, the wear of pure PEEK in oscillating motion was about 20 times that in continuous rotation, but the wear of PTFE blended PEEK in oscillating motion was improved about 3 times that in continuous rotation. And the wear of PTFE blended specimens reduced to about 1/50 that of pure PEEK in oscillating motion and about 1/2 in continuous rotation. When PTFE blended PEEK was filled with bronze particles, wear was even further reduced in oscillating motion and also in continuous rotation. Coefficient of friction of pure PEEK in oscillating motion was greater than that in continuous rotation. When PEEK was blended with PTFE, coefficients of friction were reduced to such an extent as to eliminate differences in friction characteristics according to the direction of motion. Further, pv limits of pure PEEK in oscillating motion were extremely small compared to those in continuous rotation. When PEEK was blended with PTFE, pv limits were improved in oscillating motion and also in continuous rotation.

Słowa kluczowe

EN

friction and wear characteristics; deformation; bronze powder; PEEK/PTFE blends; oscillating motion

PL

wytrzymałość materiałów; tarcie; zużycie materiału

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2002
• Tom: Vol. 7, Spec. is
• Strony: 433--439
• Opis fizyczny: Bibliogr. 5 poz., rys., wykr.

Twórcy

autor

Takahashi H.

• College of Science and Technology, Nihon University, Chiba 274-8501, JAPAN

autor

Saito A.

• College of Science and Technology, Nihon University, Chiba 274-8501, JAPAN

Bibliografia

• [1] Evance V.R. and Kennedy F.E. (1987): The effect of temperature on friction and wear in oscillatory motion of polyethylene against stainless steel. - Wear of Materials, pp.427-433.
• [2] Blanchet T A Kennedy F.E. and Tian X. (1991): The mild/severe wear transition of PTFE polymer in oscillatory'sliding contacts. - Wear of Materials (K.C. Ludema, Ed.), pp.689-692.
• [3] Tanaka K. and Kawakami S. (1982): Effect of various fillers on the friction and wear of polytetra- fluoroethylene-based composites. - Wear, vol.79, pp.221-234.
• [4] Saito J.A. (1979): Effect of filler-grading on wear of filled polyacetals. - JSPE, vol.45, pp.1291-1296.
• [5] Saito J.A. (1987): Effect of filler shape on friction and wear of bronze filled polyacetals. - JSPE, vol.53, pp.432-437.