Influence of physical and chemical processes in an abrasive paste boundary layer on balls finishing processing

• Autorzy: Murkov O. , Svirsky D.
• Konferencja: Second International Tribology Conference
• Języki publikacji: EN

Abstrakty

EN

The paper deals with a problem of balls finishing processing efficiency increasing. The compact (i.e. resource insuperfluous) approach to finishing process development on the base of main technological modes control is offered. Physical and chemical processes in a processing working zone are investigated with this purpose.

Słowa kluczowe

EN

balls finishing processing; abrasive paste; plentiful lubrication; hungry lubrication

PL

ścieranie; smarowanie maszyn; łożysko kulkowe

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2002
• Tom: Vol. 7, Spec. is
• Strony: 403--407
• Opis fizyczny: Bibliogr. 6 poz., wykr.

Twórcy

autor

Murkov O.

• Vitebsk State Technological University, 72 Moskovsky ave, Vitebsk 210035 REPUBLIC OF BELARUS

autor

Svirsky D.

• Vitebsk State Technological University, 72 Moskovsky ave, Vitebsk 210035 REPUBLIC OF BELARUS

Bibliografia

• [1] Kodnir D.S. (1976): Contact Hydrodynamics of the Machine Elements Lubrication. - Moscow: Mashinoctroenie.
• [2] Olender L.A. and Murkov O.S. (1979): Perfection of Technological Process of Spherical Surfaces Finishing. - Minsk: BelNIINITI.
• [3] Olender L.A. and Murkov O.S. (1987): Methods of the abrasive pastes efficiency increase at spherical surfaces finishing. - Minsk: BelNIINITI.
• [4] Svirsky D.N. (2000): Compact approach to 'Rapid Production’ concept realisation at the small enterprise, In: Annals of DAAAM for 2000 (B. Katalinic, Ed.). - Vienna: DAAAM Int.
• [5] Vinitsky A.G. et al. (1975): Influence of structure of pastes on lapping productivity. Manufacturing Technology and Organisation, No.5, pp.20-21.
• [6] Widiven L.D. et al. (1971): Optical analysis of the oil starvation in a ball bearing Transactions of SMEA, Problems of Friction and Lubrication, No.3, pp.34-49.