Analysis of the wear tools made of cubic boron nitride for turning of the hardened steel

• Autorzy: Dasic P. V. , Radovanovic M.
• Konferencja: Second International Tribology Conference
• Języki publikacji: EN

Abstrakty

EN

Involving and application of modern cutting tools and new cutting materials as are, for example, cubic boron nitride (CBN), present simple means for reduction of costs of metalworking cutting. In this paper is given classification of materials for modern cutting tools and the experimental research of the function of wear tool from CBN for finished turning of hardened steel 20CrMo5 for different cutting speeds on concrete production conditions. Experimental data for the different values of the cutting speed is approximation by complex power-exponential regression and its correlation coefficient in all example is greater than 0.99.

Słowa kluczowe

EN

metalworking; turning; cutting tools; cubic boron nitride (CBN); wear tools

PL

materiałoznawstwo; obróbka metalu; narzędzie tnące

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2002
• Tom: Vol. 7, Spec. is
• Strony: 341--346
• Opis fizyczny: Bibliogr. 19 poz., tab., wykr.

Twórcy

autor

Dasic P. V.

• High Technological School, 37000 Krusevac and High Technical School, 37240 Trstenik YUGOSLAVIA

autor

Radovanovic M.

• University of Niš, Faculty of Mechanical Engineering, 18000 Niš YUGOSLAVIA

Bibliografia

• [1] Chneider G. (2001): Applied cutting tool Engineering, In: Tooling & Productions (Web-site: http://toolingandproduction.com).
• [2] Daśić P. (200la): Research of wear tool from cubic boron nitride for fmished tuming of hardened Steel. - Proceedings of 4,h International Conference on Accomplishments of Electrical and Mechanical Industries DEMI-2001, April 25-26, 2001, Banja Luka, Bośnia and Herzegovina, pp.133-138.
• [3] Daśić P. (2001b): Comparative analysis ofthe different eąuation regression for the wear tool from cubic boron nitride for finishing turning. — Proceedings of International Scientific-Technical Conference ”Modern materials, technologies, and tools in mechanical and apperture , August 21-22, 2001, Kiev, Ukraina, pp.9-10.
• [4] Daśić P. (2002a): Statistical Processing of Experimental Data, Book 1: One-factoring Regression Analysis. - Monograph, Institute IMK’14. October, Krusevac, 2002, pp.250.
• [5] Daśić P. (2002b): Research of Harder Materials for Finished Turning by Means of Ceramic Cutting Tools. - Monograph, (in preparation).
• [6] Daśić P. and Jećmenica R. (1990a): Stohastical analysis of modern cutting tools application. - Proceedings of 2nd International Conference on Advanced Manufacturing Systems and Technology - AMST’90, June 19-21, 1990, Trento, Italy, vol.l, pp.643-650.
• [7] Daśić P. and Jećmenica R. (1990b): Possible trends ofincreasing production by application of modern cutting tools. - Proceedings of International Conference”New technology - ‘90”, November 15-17, 1990, Ćaćak, Yugoslavia, pp.69-80.
• [8] Daśić P. and Jećmenica R. (1991): Analysis of the machining efficiency by application of the ceramic cutting tools. - Journal Tribology in Industry, Kragujevac, vol.XIII, No.2, p.51-55.
• [9] Daśić P., Jećmenica R. and Radovanović M. (2000): Application of modern cutting tools in region of materiał working magnified hardness. - Proceedings of ”New Competitive and progressive technologies, machines and mechanizms in condition modern market”, May 18-19, 2000 Mosdlpu Belarus, pp.43-47.
• [10] Dworak U. (1984): SPK Schneidkeramik, Die Entwieklung zum Hochleistungs Schneidstoff fur die tagliche Praxis. - Referate SPK Schneidkeramik - Tage’84, Dusseldorf, 1984, pp.4-10.
• [11] Momper J.F. (1985): Untersuchung zum standvermogen keramischer werkzeugschneiden beim drehen unter besonderer berucksichtigung der schneideneingrijfsverhaltnisse. - Dissertation, Vom Fachbereich Maschinenwesen der Universitat Kaiserslautem, 1985.
• [12] Novikov N.V. and Devin L.N. (1988): Cutting tools in metalworking. - Publisher”Knowledge”, Kiev.
• [13] Radovanović M. (2002): Metalworking technology, Cutting work. - Faculty of Mechanical Engineering, NiS, 2002.
• [14] Reinhold R. and Becker S. (1982): Superharte Schneidwerkstoffe der Spanungstechnik. - VEB Verlag Technik, Berlin, 1982.
• [15] Spur G. and Stoferle T. (1980): Handbuch der Fertigungstechnik, Spanen. - Carl Hanser Verlas Munchen, Wien, 1980.
• [16] Tanović Lj. (1997): Production technology of modem cutting tools elements. - Faculty of Mechanical Engineering, Belgrade, 1997.
• [17] Tanović L. (2000): Application of modern cutting tools in industry. - Proceedings of 26lh JUPITER Conference, 22nd Simposium NC-ROBOTS-FMS, February 08-11, 2000, Belgrade, pp.3.85-3.91.
• [18] Vereshcaka A.S. and Bolotnikov V.G. (1989): Analysis of development tendentious and fields of application tools for cutting hardmachining materials. - Mostankin, Moskva.
• [19] Whitney E.D. (1994). Ceramic cutting tools, Materials, development and performance. — Hard Cover, 1994.