Reliability analysis of the tribo-mechanical systems components

• Autorzy: Dasic P. V.
• Konferencja: Second International Tribology Conference
• Języki publikacji: EN

Abstrakty

EN

In this paper is it given an example of the reliability of the tribo-mechanical components (the power system for eccentric press INN 1500, the cutting tools made of cubic boron nitride - CBN for turning of hardened steel 20CrMo5 and the multi-bladed indexable inserts made of multi-coatings hard metal for turning of steel 18CrNi6). Reliability of the tribo-mechanical systems components is determined on the basis chosen of theoretical distribution, which in the best way approximate experimental data on the base of comparative analysis.

Słowa kluczowe

EN

tribo-mechanical systems; eccentric press; cutting tools

PL

niezawodność materiałów; prasa mechaniczna; narzędzia tnące

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2002
• Tom: Vol. 7, Spec. is
• Strony: 311--317
• Opis fizyczny: Bibliogr. 18 poz., tab., wykr.

Twórcy

autor

Dasic P. V.

• High Technological School, 37000 Kruševac and High Technical School 37240 Trstenik, YUGOSLAVIA

Bibliografia

• [1] Basu A.P. (1986): Reliability and quality control. Amsterdam, New York, Oxford: Elsevier Science Publishers B.A.
• [2] Daśić P. (1990): Algorithm approach to determination of reliability of construction machinery components. - Proceedings of International Conference on Engineering Design l(1 28-30,1990, vol.3, pp.1433-1440, Dubrovnik.
• [3] Daśić P. (1991): A method for reliability evolution of functional elements of technical systems on the basis of the optimum choice of the theoretical distribution law. Journal of Urllrthl Quality, Moskva, vol.23, No.3, pp.46-51.
• [4] Daśić P. (1999): Examples of analysis of different functions of cutting tool failure distribution Journal of Tribology in Industry, Kragujevac, No. 2, pp. 59-67.
• [5] Daśić P. (2000a): Comparison analysis of different functions of failure distribution of cutting tool of hard metal for turning. - Journal OMO, Belgrade, vol.XXVIII (1999) No.4-5, pp.170-177.
• [6] Daśić P. (2000b): Determination of reliability of technical system components on the basic of comparative analysis of different functions distribution. Proceedings of International Conference about Research and Development Machining Components and Systems IRMES’2000, September 14-15, 2000, Kotor, Montenegro, pp.371-376.
• [7] Daśić P. (2001a): Determination of reliability of ceramic cutting tools on the basis of comparative analysis of different functions distribution. - International Journal of Quality & Reliability Management, © MCB University Press, Bradford, vol.18, No.4, pp.433-446.
• [8] Daśić P. (2001b): Reliability analysis of the components of machining and technological system. Summaries of 16,h International Conference on Production Research ICPR-16, vol.5, pp.45 and CD-ROM name of file 0714.pdf or K5.5, July 29 - August 03, 2001, Prague, Czech Republic, pp.1-5.
• [9] Daśić P. (2001c): Comparative analysis of different theoretical models of reliability of ceramics cutting tools for turning. - Scientific Journal of New Materials and Technologys in Metalurgical and Mechanical Equipment, Zaporizhia State Technical University, Zaporizhia, No.2, pp.66-70.
• [10] Daśić P. (2002a): Analysis of the normal model of the reliability of cutting tools made of cubic boron nitride. - Proceedings of 1st International Conference on Advanced Technologies for Developing Countries ATDC’02, September 12-14, 2002, Slavonski Brod, Croatia.
• [11] Daśić P. (2002b): Reliability analysis of the cutting tools made of cubic boron nitride. Proceedings of 13lh International DAAAM Symposium DAAA 2002, October 23-26, 2002, Vienna, Austria.
• [12] Daśić P. (2002c): Reliability analysis of the cutting tools made of multi-coatings hard metal. - Proceedings of 3rd International Conference ’’The Coatings in Manufacturing Engineering”, November 28-29, 2002, Thessaloniki, Greece.
• [13] Dhillon B.S. (1985): Quality Control, Reliability and Engineering Design. - New York: Marcel Decker, Basel.
• [14] Kibarev A.I. (1989): Reliability in Mechanical Engineering. - Moskva: Publisher of Standards, pp.224.
• [15] Pereverzev E.S. (1990): Reliability and Measurement of Technical Systems. - Kiev: Scientific House, pp.328.
• [16] Reshetov D.N., Ivanov A.S. and Fadeev V.Z. (1988): Reliability of machine. - Moskva: High School, pp.238.
• [17] Veselinović S., Daśić P., Popovic P. and Durić S. (2000): Reliability analysis of eccentric press power system INN 1500 in phase of real exploitation. - Proceedings of 26th JUPITER Conference with International Participation, 22th Symposium of NC-ROBOTS-FMS, pp.3.157-3.162, February 8-11, 2000, Belgrade.
• [18] Vujanovic N. (1987): Theory of the reliability of technical system. Belgrade: Military Centre for Publishing and Journalism.