Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Konferencja
Second International Tribology Conference
Języki publikacji
Abstrakty
In article short review of investigation of permeability of porous sliding bearings is presented. Influence of different factors on value of permeability is analysed. Special regard is focused on influence of kind of oil. The authors chose three kinds of oil. In the first stage of the research the process of oil ageing had been made. Then one analysed chosen properties of given oils. In the main third stage permeability of given oils was analysed in specified conditions of oil temperature and pressure. Achieved results of preliminary investigations confirmed strong influence of kind of oil and its properties on permeability of porous bearing.
Rocznik
Tom
Strony
255--261
Opis fizyczny
Bibliogr. 17 poz., rys., tab., wykr.
Twórcy
autor
- Military University of Technology, Faculty of Mechanics, Department of Engine Fuels and Lubricants, 00-908 Warsaw 49, Kaliskiego Street, No. 2, POLAND
autor
- Military University of Technology, Faculty of Mechanics, Department of Engine Fuels and Lubricants, 00-908 Warsaw 49, Kaliskiego Street, No. 2, POLAND
Bibliografia
- [1] Capone E., Niola V. and Bocchini G. F. (1980): Further developments in porous bearing the 20 step permeability bearing. - Tribology International, December, pp.294-296.
- [2] Cegielski W. and Rutkowski W. (1960): Sintered Bearings. Warsaw: PWT.
- [3] Cieślicki K. and Krzemiński K. (1995): Spatial anisotropy of permeability in sleeve bearings. The International Journal of Powder Metallurgy, vol.31, No.3, pp.221-229.
- [4] Kałdoński T. (1997): Complexity of self-lubricating mechanism of porous bearing - two models. - Tribology, No.5-6, pp.653-657.
- [5] Krzemiński K. (1976): Influence of anisotropy of porous sleeve on functional properties of sliding bearings. - Mechanical Review, No.22, pp.767-770.
- [6] Krzemiński K. (1978): Analysis of resistance to motion in porous sliding bearings. - The Archive of Mechanical Engineering, No.4, pp.646-655.
- [7] Krzemiński K. (1979): Motional properties of self-lubricating porous bearings used in motor industry. - Mechanical Review, No.5, pp.14-18.
- [8] Krzemiński K. (1984): Pattern of permeability in porous bearing sleeves sintered from powders of Iron. - Powder Metallurgy, pp.85-95.
- [9] Krzemiński K. (1985): Motional properties of self-lubricating porous bearings used in motor industry. Mechanical Review, No.7, pp.10-13.
- [10] Krzemiński K. (2000): Change of microstructure of porous sleeve during running in process. - Scientific Works of Faculty of Materials Science of Radom University of Technology, Radom, pp.96-102.
- [11] Lawrowski Z. (1962): Self-lubricating mechanism of porous bearings on example porous steel. - Mechanical Review, No.22, pp.691-696.
- [12] MissoI W.( 1978): Sintered Parts of Machines. - Katowice: Silesia.
- [13] Morgan V.T. (1964): Hydrodynamic porous metal bearings. - Lubrication Engineering, No. 12, vol.39, pp.448-455.
- [14] Murti P.R.K. (1971): Hydrodynamic lubrication of long porous bearings. - Wear, No.18, pp.449-460.
- [15] Olexa J. (1980): Investigation of the relations between the permeability and the service life of porous self-lubricated bearings. — Wear, No.58, pp. 1-14.
- [16] Kotkowski W. (1963): Metallurgy of Powders in Modern Technics. - Katowice: PWN.
- [17] Kotkowski W. (1977): Projecting and Proprieties of Articles Sintered from Powders and form Fibres. Warsaw: PWN.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ2-0002-0036