Connecting-rod big end bearing thermoelastohydrodynamic lubrication (TEHD) - comparison between theory and experiment

• Autorzy: Hoang L. V. , Souchet D. , Bonneau D.
• Konferencja: Second International Tribology Conference
• Języki publikacji: EN

Abstrakty

EN

This paper discusses the experimental device used to investigate elastohydrodynamic behaviour of connecting-rod big end bearing models. The vaseline oil is used. After a brief introduction, a resume of the theory and experiment are presented. The presentation of experimental results is given as well as a comparison with theoretical results.

Słowa kluczowe

EN

connecting-rod; lubrication; thermoelastohydrodynamic; experiment

PL

smarowanie; korbowód; hydrodynamika

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2002
• Tom: Vol. 7, Spec. is
• Strony: 231--236
• Opis fizyczny: Bibliogr. 9 poz., rys., wykr.

Twórcy

autor

Hoang L. V.

• Laboratoire de Mécanique des Solides 4, avenue de Varsovie, 16021 Angouleme Cedex, FRANCE

autor

Souchet D.

• Laboratoire de Mécanique des Solides 4, avenue de Varsovie, 16021 Angouleme Cedex, FRANCE

autor

Bonneau D.

• Laboratoire de Mécanique des Solides 4, avenue de Varsovie, 16021 Angouleme Cedex, FRANCE

Bibliografia

• [1] Bonneau D., Guines D., Frene J. and Toplosky J. (1995): EHD analysis, including structural inertia effects and a mass-conversing cavitation model. - Transactions of the ASME, Journal of Lubrication Technology, vol. 117, pp.540-547.
• [2] Fantino B., Frene J. and Du Parquet J. (1979): Elastic connecting-rod bearing with piezoviscous lubricant: analysis of the steady-state characteristics. - Transactions of the ASME, J. Lubrication Technology, vol. 101, pp. 190-200.
• [3] Kim B J and Kim K.W. (2001): Thermo-elastohydrodynamic analysis of connecting-rod bearing in internal combustion engine. - Transactions of the ASME, vol. 123, pp.444-454.
• [4] Masuda, T., Ushijima, K. and Hamai K. (1992): A measurement of oil film pressure distribution in connecting-rod bearing with test rig. - Tribilogy Transactions, vol.35, No. 1, pp.71-76.
• [5] Oh K.P. and Goenka P.K. (1985): An optimum connecting-rod design study - a lubrication viewpoint. ASME Tribology Division, Journal of Tribology, vol.108, pp.487-496.
• [6] Optasanu V. and Bonneau D. (2001): Lubrification elastohydrodynamique des paliers de tete de bielle - etude experimental utilisant des modeles photoelastiques. -Colloque PhotoMecanique 2001, Poitiers, pp. 255-262.
• [7] Piffeteau S., Souchet D. and Bonneau D. (2000): Influence of thermal and elastic deformations on connecting-rod big and bearing lubrication under dynamic loading. ASME, Journal of Tribology, vol.122, pp.181-191.
• [8] Rhode S.M. and Li D.F. (1980): A generalized short bearing theory.- Transactions of the ASME Journal of Tribology, vol. 102, No.2, pp. 278—282.
• [9] Souchet D., Piffeteau S. (2001): Approche par la MEF de la Lubrification Thermoelastohydrodynamique des Paliers de Tete de Bieli, Revue Europeenne des Elements Finis - vol. 10, No.6-7, pp.815-847.