Frictional forming of electroplated copper and zinc coatings

• Autorzy: Sułek W. , Jedynak R.
• Konferencja: Second International Tribology Conference
• Języki publikacji: EN

Abstrakty

EN

The outer layer of pin-on-disk was modified by galvanic covering of the disc with copper and zinc. The tribological tests were performed using T-01M machine (Szczerek, 1997). The tested surfaces were characterized by roughness and composition of outer layers. After the test, which lasted for 3600s (the distance: 360m), significant wear was noticed. For copper it reached about 10mm and about 20mm for zinc. On the basis of changes in topography of surfaces one can conclude that in the case of copper adhesive wear was dominant, while for zinc - abrasive. The performed Roentgen tests show that copper (or zinc) transfer from the disc to the pin occurs as the result of friction.

Słowa kluczowe

EN

electroplated coatings; dry friction; adhesive wear; pin-on-disk tester

PL

tarcie; powłoka galwaniczna; trybologia

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2002
• Tom: Vol. 7, Spec. is
• Strony: 183--187
• Opis fizyczny: Bibliogr. 12 poz., rys., tab., wykr.

Twórcy

autor

Sułek W.

• Technical University of Radom, Malczewskiego 29, 26-600 Radom, POLAND

autor

Jedynak R.

• Technical University of Radom, Malczewskiego 29, 26-600 Radom, POLAND

Bibliografia

• [1] Booser E. (Ed.) (1997): Tribology Data Handbook. - New York: Elsevier Science Publishers Lldi.
• [2] Holmberg K. and Matthews A. (1994): Coatings Tribology : Properties, Techniques, and Application Surface Engineering (Tribology Series, vol. 28). - New York: Elsevier Science Publishers.
• [3] Jedynak R. and Sulek W. (2000): Change of the composition and state of the galvanic silver as the result of friction. - Tribologia, No.3, pp363-374.
• [4] Schmidt G. and Steinhauser S. (1996): Characterization of wear protective coatings. - Tribology International, No.29, pp.207-214.
• [5] Sulek W. and Jedynak R. (2001): Trockene Reibung im System Keramik - Stahl. - Schmirungstechnik und Tribologie, No.4, pp.21-28.
• [6] Sulek M. and Jedynak R. (2002): Die eksperimentelle bestatigung des models fur die trockene reibung im system stahl 45 - keramik. - Tribologie und Schmierungstechnik, No.l, pp.38-46.
• [7] Sulek W. and Jedynak R. (2000): Tribological properties of galvanic silver coatings. - Tribologia, No.4, pp.705-710.
• [8] Sulek W. and Jedynak R. (1993): Friction time and metallorganic additives concentration influence on the friction coefficient. - Tribologia, No.4/5, 381-384.
• [9] Sulek W. (1996): Tribologische Eigenschaften metallorganischer Verbindungen in Glycerin. - Tribologie und Schmierungstechnik, No.5, pp.248-253.
• [10] Sulek W.: (1995): Eine Methode zur Ermittlung der Reibungswarme und Reibwertes. - Tribologie und Schmierungstechnik, No.4, pp.215-218.
• [11] Szczerek M. (1997): Methodological Problems of Experimental Sistematize of Tribological Search. - Kmlom: Pub. Institiute for Terratechnology.
• [12] Zhang W., Xue Q., Zhang X. (1998): The influence of brighteners on the friction and wear of electrodeposited multilayer films. - Wear, No.214, pp.74-78.