The characteristics of hydrostatic journal bearing with a floating bush

• Autorzy: Yamamoto H. , Harada M. , Tsukazaki J. , Sato Y.
• Konferencja: Second International Tribology Conference
• Języki publikacji: EN

Abstrakty

EN

We proposed a new type hydrostatic journal bearing with a floating bush to decrease the frictional torque. The characteristics of proposed bearing are calculated and we found out the optimum design parameter. Moreover, we fabricated the test bearing and measured the characteristics of bearing. The calculated results and the measured results are relatively coincide with each other.

Słowa kluczowe

EN

journal bearing; floating bush; load capacity; frictional torque

PL

łożyska; ładowność; tarcie

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2002
• Tom: Vol. 7, Spec. is
• Strony: 127--132
• Opis fizyczny: Bibliogr. 2 poz., rys., wykr.

Twórcy

autor

Yamamoto H.

• Department of Mechanical Engineering, Saitama University 255, Shimo-Ookubo, Saitama, JAPAN

autor

Harada M.

• Department of Mechanical Engineering, Saitama University 255, Shimo-Ookubo, Saitama, JAPAN

autor

Tsukazaki J.

• Department of Mechanical Engineering, Saitama University 255, Shimo-Ookubo, Saitama, JAPAN

autor

Sato Y.

• Department of Mechanical Engineering, Saitama University 255, Shimo-Ookubo, Saitama, JAPAN

Bibliografia

• [1] Tanaka M. and Hori Y. (1972): Stability characteristics of floating bush bearing. - J. of Lubr. Tech., Trans. ASME, July 1972.
• [2] Harada M. and Tsukazaki J. (1989): Steady-state characteristics of a hydrostatic thrust bearing with a floating disk. - J. of Trib., Trans. ASME, vol.l 11.