PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Mechanical parameters of a multilobe conical bearing with ferromagnetic lubricant

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Konferencja
Second International Tribology Conference
Języki publikacji
EN
Abstrakty
EN
In this paper the authors present a solution to the problem of an inertia effect of ferromagnetic lubricant flow in a multilobe conical bearing. The problem was solved by Galerkin's method after assuming that the bearing is lubricated with an incompressible Newtonian lubricant. The general form of solutions for pressure distribution and axial load for particular cases of the bearing geometry are given
Rocznik
Strony
119--126
Opis fizyczny
Bibliogr. 17 poz., rys., wykr.
Twórcy
autor
  • University of Zielona Góra, Department of Mechanics ul. Szafrana 2, P.O.Box 47, 65-516 Zielona Góra, POLAND
autor
  • University of Zielona Góra, Department of Mechanics ul. Szafrana 2, P.O.Box 47, 65-516 Zielona Góra, POLAND
autor
  • University of Zielona Góra, Department of Mechanics ul. Szafrana 2, P.O.Box 47, 65-516 Zielona Góra, POLAND
autor
  • University of Zielona Góra, Department of Mechanics ul. Szafrana 2, P.O.Box 47, 65-516 Zielona Góra, POLAND
Bibliografia
  • [1] Agrawal G.L. (1990): The load capacity of power-shaped hydrodynamic conical gas bearings. - STLE Annual Meeting, May 7-10, Denver, Colorado.
  • [2] Bashtovoy V.G., Berkovsky B.N. and Vislovich A.N. (1988): Introduction to Thermomechanics of Magnetic Fluids. - Hemisphere Co., Washington D.C.
  • [3] Dargaiah K., Parthasarathy K. and Prabhu B.S. (1991): Finite Element Method for Computing Dynamic Coefficients of Multilobe Bearings. - STLE Reprint, No.91-TC-48-l.
  • [4] Kurpiński T., Walicki E. and Walicka A. (1996): Performance of a multilobe conical bearing with ferromagnetic lubricant. - Atti IV Convegno AIMETA di Tribologia, 3-4 Oct. 1996, St. Margherita Ligure, pp.91-97.
  • [5] Malik M. and Bert C.W. (1994): Differential quadrature solutions for steady-state incompressible and compressible lubrication problems. - J.Tribology, vol.116, pp.296-302.
  • [6] Mehta N.P. and Rattan S.S. (1993): Performance of three-lobe pressure-dam bearings. - Tribology Int., vol.26, pp.435-441.
  • [7] Pinkus O. and Stemlicht B. (1961): Theory of Hydrodynamic Lubrication. - New York: McGraw-Hill.
  • [8] Rosensweig R.E. (1985): Ferrohydrodynamics. - Cambridge Univ. Press, Cambridge.
  • [9] Szaniawski A. (1970): Through flow of a Viscous Incompressible Fluid in a Slot of the Conical Bearing. - IBTP Reports, No. 15, Warsaw.
  • [10] Walicki E. (1975): Viscous fluid flow in a slot of the curvilinear thrust bearing. - Rev. Roum. Sci. Techn., Mec. Appl., vol.20, No.4, pp.483-493.
  • [11] Walicki E. (1977): Motion of Viscous Fluids in Slots of The Thrust Bearings (in Polish). — Bydgoszcz: AT-R Publishers.
  • [12] Walicki E. (2002): Lubrication Theory of Bearings (in Polish). - Zielona Góra: University Press.
  • [13] Walicki E. and Walicka A. (1994a): Analysis of an incompressible Newtonian flow in a slot of the curvilinear thrust bearing. - Mechanika, ZN WSI Zielona Góra, No.20, pp.33-60.
  • [14] Walicki E. and Walicka A. (1994b): Performance of a multilobe curvilinear thrust bearing. - Mechanika, ZN WSI Zielona Góra, No.20, pp.61-74.
  • [15] Walicki E. and Walicka A. (1995): Analysis of a ferrofluid flow in a slot of the curvilinear thrust bearing. - Appl. Mech. Eng., vol.l, No.l, pp.25-55.
  • [16] Walicki E., Walicka A. and Karpiński T. (1995): Galerkin's method for a multilobe conical bearing with incompressible newtonian lubricant. - Appl. Mech. Eng., vol.l, No. 1, pp.57-75.
  • [17] Walicki E., Walicka A. and Karpiński T. (1996): Inertia effect in multilobe conical bearing with an incompressible newtonian lubricant. - Appl. Mech. Eng., vol.l, No.2, pp.153-171.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ2-0002-0016
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.