Application of refined thermal Reynolds equation in the analysis of hydrodynamic lubrication of strip rolling

• Autorzy: Bhatt V. K.
• Języki publikacji: EN

Abstrakty

EN

A refined thermal Reynolds equation considering conduction and convection modes of heat transfer across the film for inlet zone of the liquid lubricated strip rolling, developed by Bhatt and Sengupta, is applied in this analysis. It is known that inlet zone plays a dominant role in fixing the lubricant film thickness in the work zone. Hence, for the present analysis the effect of conduction and convection across the film in the inlet zone is studied on the work zone as well as the effect of variation of convection effect in the form of variation of the Peclet number. It is observed that the roll separating force and torque decrease with increasing the Peclet number.

Słowa kluczowe

EN

strip rolling; hydrodynamic lubrication; thermal effects; Peclet number

PL

hydrodynamika; efekt termiczny; walcowanie taśm

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: International Journal of Applied Mechanics and Engineering
• Rocznik: 2002
• Tom: Vol. 7, no 4
• Strony: 1125--1139
• Opis fizyczny: Bibliogr.8 poz., wykr.

Twórcy

autor

Bhatt V. K.

• Mechanical Engineering Department Bundelkhand Institute of Engineering and Technology Jhansi - 284001 (U.P.) INDIA

Bibliografia

• [1] Bhatt V.K. (1989): Theoretical Investigations on Fluid Behavior in Metal Forming. - Ph.D. Thesis submitted to the Faculty of Engineering, University of Allahabad, India.
• [2] Bhatt V.K. and Sengupta D.K. (1996): Analysis of thermal effects in the yield phase of hydrodynamic lubricant film in plane strain forging. - ASME J. of Tribology, vol.l 18, No.4, pp.880-885.
• [3] Dow T.A., Kannel J.W. and Bupara S.S. (1975): A hydrodynamic lubrication theory for strip rolling including thermal effects. - ASME J. of Lubrication Technology, Series F, vol.97, No.l, pp.9-13.
• [4] Mahadavian S.M. and Wilson W.R.D. (1976): Lubricant flow in a piasto hydrodynamic work zone. - ASME J. of Lubrication Technology, Series F, vol.98, No.l, pp. 16-21.
• [5] Sadeghi F. and Dow T.A.(1987): A thermal effects in rolling/sliding contacts: Part 2 - Analysis of thermal effects in fluid film. - ASME J. of Tribology, vol.109, pp.512-517.
• [6] Wilson W.R.D. and Mahadavian S.M. (1974): A thermal Reynolds equation and its application in the analysis of piasto hydrodynamic inlet zones. - ASME J. of Lubrication Technology, Series F, vol.96, No.4, pp.572-578.
• [7] Wilson W.R.D. and Murch L.E. (1976): A refined model for the hydrodynamic lubrication of strip rolling. - ASME J. of Lubrication Technology, vol.98, No.3, pp.426-432.
• [8] Wilson W.R.D. and Walowit J.A. (1971): An isothermal hydrodynamic lubrication Theory for strip rolling with front and back tension. - Tribology Group Conference Volume, Inst. Mech. Eng., London, pp.164-172.