Bimetallic layered castings alloy steel - carbon cast steel

• Autorzy: Wróbel T. , Cholewa M. , Tenerowicz S.
• Języki publikacji: EN

Abstrakty

EN

In paper is presented technology of bimetallic layered castings based on founding method of layer coating directly in cast process so-called method of mould cavity preparation. Prepared castings consist two fundamental parts i.e. bearing part and working part (layer). The bearing part of bimetallic layered casting is typical foundry material i.e. ferritic-pearlitic carbon cast steel, whereas working part (layer) is plate of austenitic alloy steel sort X10CrNi 18-8. The ratio of thickness between bearing and working part is 8:1. The quality of the bimetallic layered castings was evaluated on the basis of ultrasonic NDT (non-destructive testing), structure and macro- and microhardness researches.

Słowa kluczowe

EN

bimetal; cast steel; steel; austenite; ferrite; pearlite

PL

bimetal; staliwo; austenit; ferryt; perlit

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2011
• Tom: Vol. 11, iss. 1
• Strony: 105--108
• Opis fizyczny: Bibliogr. 17 poz., rys.

Twórcy

autor

Wróbel T.

autor

Cholewa M.

autor

Tenerowicz S.

• Silesian University of Technology, Foundry Department, Towarowa 7, 44-100 Gliwice, PL,

Bibliografia

• [1] J. Marcinkowska, B. Kusznir: Cast coatings on machine elements, Proceedings Materiale of Scientific Conference "Cast Form of Machine Elements", Olsztyn (1979), 1-11 (in polish).
• [2] T. Heijkoop, I. Sare: Cast-bonding - a new process for manufacturing composite wear products, Cast Metals, 3 (1989), 160-168.
• [3] J. Gawroński, J. Szajnar, P. Wróbel: Study on theoretical bases of receiving composite alloy layers on surface of cast steel castings, Journal of Materials Processing Technology, 157-158 (2004), 679-682.
• [4] D. Bartocha, J. Suchoń, S. Jura: Layer castings, Solidification of Metals and Alloys, 38 (1998), 151-156 (in polish).
• [5] M. Cholewa, S. Tenerowicz, T. Wróbel: Quality of the joint between cast steel and cast iron in bimetallic castings, Archives of Foundry Engineering, 3 (2008), 37-40.
• [6] A. Klimpel: Surfacing and thermal spraying. Technologies, WNT, Warsaw (2000) (in polish).
• [7] A. Klimpel, L.A. Dobrzański, A. Lisiecki, D. Janicki: The study of the technology of laser and plasma surfacing of engine valves face made of X40CrSiMo10-2 steel using cobalt-based powders, Journal of Materials Processing Technology, 175 (2006), 251-256.
• [8] W. Xibao, W. Xiaofeng, S. Zhongquan: The composite Fe-Ti-B-C coatings by PTA powder surfacing process, Surface and Coatings Technology, 192 (2005), 257-262.
• [9] J. Szajnar, P. Wróbel, T. Wróbel: Model castings with composite surface layer - application, Archives of Foundry Engineering, 3 (2008), 105-110.
• [10] J. Viala, M. Peronnet, F. Barbeau, F. Bosselet, J. Bouix: Interface chemistry in aluminium alloy castings reinforced with iron base inserts, Composites: Part A, 33 (2002), 1417-1420.
• [11] S. Pietrowski, T. Szymczak: Model of the alphinising coating crystallization on iron alloys, Archives of Foundry Engineering, 3 (2007), 123-128.
• [12] S. Pietrowski: Structure of alifinising layer on the gray cast iron, Archives of Foundry, 11 (2004), 95-104.
• [13] J. Szajnar, M. Cholewa, S. Tenerowicz, T. Wróbel: Enrichment of surface of low-alloyed cast iron with use of austenite layer, Archives of Foundry Engineering, 1 (2010), 187-190.
• [14] M. Cholewa, T. Wróbel, S. Tenerowicz: Bimetallic layer castings, Journal of Achievements in Materials and Manufacturing Engineering, 43/1 (2010), 385-392.
• [15] K. Sękowski, J. Piaskowski, Z. Wojtowicz: Atlas of structures of founding alloys, WNT, Warsaw (1972) (in polish).
• [16] J. Taler., P. Duda: Solving direct and inverse heat conduction problems, Springer-Verlag, Berlin (2006).
• [17] J. Adamczyk: Engineering of metallic materials, Publishers of Silesian University of Technology, Gliwice (2004) (in polish).