The estimation of harmfulness for environment of moulding sand with biopolymer binder based on polylactide

• Autorzy: Major-Gabryś K. , Dobosz S. M. , Jakubski J.
• Języki publikacji: EN

Abstrakty

EN

The article takes into consideration technological and ecological aspects of IV generation moulding sands. Investigations concerning an application of biopolymer materials as binders for moulding sands are presented in the paper. These investigations are the continuation of examinations related to applications of various biopolymers as binding agents and to the properties of the moulding sands with biopolymer binders. In the paper there are the researches concerning analyzing gases emitted from moulding sands during heating.

Słowa kluczowe

EN

moulding sand; binding material; biopolymer; environment hazard

PL

piasek formierski; materiał wiążący; biopolimer

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2011
• Tom: Vol. 11, iss. 1
• Strony: 69--72
• Opis fizyczny: Bibliogr. 14 poz., wykr.

Twórcy

autor

Major-Gabryś K.

autor

Dobosz S. M.

autor

Jakubski J.

• Department of Moulding Materials, Mould Technology and Foundry of Non-ferrous Metals, Faculty of Foundry Engineering, AGH University of Science and Technology, ul. Reymonta 23, 30-059 Kraków, Poland,

Bibliografia

• [1] Kuciel S., Liber-Kneć A., Zajchowski S., Biocomposites made of thermoplastic starch or of polylactide and starch mixture filled with natural fibers, POLIMERY, no 10 (2009) 667-673 (in Polish).
• [2] Kuciel S., Kuźniar P., Liber-Kneć A., Polymer biocomposites with renewable sources, Archives of Foundry vol. 10, no 3 (2010) 53-56.
• [3] Florjańczyk Z., Debowski M., Chwojnowska E., Łokaj K., Ostrowska J., Synthetic and natural polymers in present-day polymer materials, Part I - Polymers made of renewable resources and polymer nanocomposites, POLIMERY no 10 (2009) 611-625 (in Polish).
• [4] Tackes G., Core Binders: A Look into the Future, Modern Casting Oct 1 (2001) 24-27.
• [5] Eastman J., Protein - based binder update: Performance put to the Test, Modern Casting, no 10 (2000) 32 - 34.
• [6] Kramářová D., Brandštetr J., Rusín K., Henzlová P., Biogenic polymer materials as foundry moulds and cores binders, Slévárenství vol. 60, no 2-3 (2003) 71-73 (in Czech).
• [7] Pielichowski J., Puszyński A., Chemistry of polymers, WNT Teza, Kracow (2004) (in Polish).
• [8] Błędzki A.K., Collective work, Recycling of polymer materials, WNT, Warsaw (1997) (in Polish).
• [9] Połowiński S., Physical chemistry of polymers, Publishing House of Technical University of Lodz, Łódź (2001) (in Polish).
• [10] Dobosz St. M, Major-Gabryś K., The selection of moulding sands with biopolymers, Technológ, vol. II, special number (2010) 17-22.
• [11] Dobosz St. M., Major-Gabryś K., Biopolymers as IV generation moulding sands binders, Archives of Mechanical Technology and Automation, vol. 28, (2010) 11-18 (in Polish).
• [12] Dobosz St. M, Major-Gabryś K., Strength properties of moulding sands with chosen biopolymer binders, Archives of Foundry, vol. 10, no 3 (2010) 17-20.
• [13] Technical and safety data sheets - Bio-Flex F 6510.
• [14] Major-Gabryś K., Dobosz St. M., Jakubski J.: Thermal deformation of moulding sands with biopolymer binders, Archives of Foundry Engineering, Vol. 10, no 4, (2010) 129-132.