Comparison of simulation programs MAGMASOFT and NOVAFLOW&SOLID in terms of results accuracy

• Autorzy: Vasková I. , Fecko D. , Eperješi Ľ.
• Języki publikacji: EN

Abstrakty

EN

The use of foundry simulation programs is nowadays considered as a must have for any prosperous foundry. On the market there a plenty of simulation programs to simulate foundry processes, mainly filling of the moulds, solidification, prediction of foundry defects, mechanical properties and stresses that are in the castings during and after solidification. Between the best foundry simulation programs belong ProCAST, MAGMASoft and NovaFlow&Solid. Using these simulation programs will lead to the time and financial savings in the pre-production stage of castings production and also these programs can educate the technologists more deeply what is going on in the mould during the castings production. The work is concentrated on comparison of simulation programs MAGMASoft and NovaFlow&Solid from the results accuracy point of view. The main aim is to compare these two programs in simulation of filling and solidification and expected occurrence of defects on the same casting. The results obtained from simulations will be compared from the view of results accuracy, mainly the process of filling of the mould cavity, the solidification process, the expected occurrence of foundry defects and mechanical properties of the simulated castings. The next aim is to compare both simulation programs in terms of time consumption that is needed to prepare the simulation, simulate and evaluate the obtained results.

Słowa kluczowe

EN

simulation program; solidification; shrinkage; MAGMASOFT; NovaFlow&Solid

PL

program symulacyjny; skurcz krzepnięcia

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2011
• Tom: Vol. 11, iss. 1s
• Strony: 51--54
• Opis fizyczny: Bibliogr. 7 poz., rys.

Twórcy

autor

Vasková I.

autor

Fecko D.

autor

Eperješi Ľ.

• Technická Univerzita v Košiciach, Letná 9, 04001 Košice,

Bibliografia

• [1] HERMAN, A. a kol.: Počítačové simulace ve slévárenství, ČVUT, 2000, ISBN 80-01-02220 - X.
• [2] FECKO, D.: Diplomová práca: Počítačová simulácia tuhnutia odliatkov z liatiny s lupienkovým grafitom, Technická univerzita v Košiciach, Hutnícka fakulta, Katedra metalurgie železa a zlievarenstva, odbor Zlievarenstvo, 2009.
• [3] MAGMASOFT 4.4: Manual, 2005.
• [4] NovaFlow & Solid CV: Manual, 2010.
• [5] MAGMASOFT 4.4: Postprocessor on Geometry, Presentation of Results, 2005.
• [6] NOVACAST E-newsletter, No 1, June 2010.
• [7] NOVACAST E-newsletter, No 2, December 2010.