Hydrogen analysis and effect of filtration on final quality of castings from aluminium alloy AlSi7Mg0,3

• Autorzy: Brůna M. , Sládek A.
• Języki publikacji: EN

Abstrakty

EN

The usage of aluminium and its alloys have increased in many applications and industries over the decades. The automotive industry is the largest market for aluminium castings and cast products. Aluminium is widely used in other applications such as aerospace, marine engines and structures. Parts of small appliances, hand tools and other machinery also use thousands of different aluminium castings. The applications grow as industry seeks new ways to save weight and improve performance and recycling of metals has become an essential part of a sustainable industrial society. The process of recycling has therefore grown to be of great importance, also another aspect has become of critical importance: the achievement of quality and reliability of the products and so is very important to understand the mechanisms of the formation of defects in aluminium melts, and also to have a reliable and simple means of detection.

Słowa kluczowe

EN

casting defect; quality management; aluminium alloy; filtration; remelting

PL

wada odlewnicza; zarządzanie jakością; stop aluminium; przetapianie

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2011
• Tom: Vol. 11, iss. 1s
• Strony: 5--10
• Opis fizyczny: Bibliogr. 6 poz., rys., tab., wykr.

Twórcy

autor

Brůna M.

autor

Sládek A.

• Department of Technological Engineering, Žilina University from Žilina , Univerzitná 1825/101026 Žilina, Slovakia,

Bibliografia

• [1] P. Waite, in Light metals 2002 (Ed.: W. Schneider), TMS, Warrendale Pa. 2002; 841 ff.
• [2] Campbell, John, Castings. 2nd ed. 2003: Butterworth Heinemann, Oxford, UK.
• [3] L. P. H. Juergens, W. G. Sloof, F. D. Tichelaar.
• [4] E. J. Mittemeijer, Structure and morphology of aluminum-oxide films formed by thermal oxidation of aluminum. Thin Solid Films, 2002 Tiryakioglu, M., J. Campbell and J. T. Staley, Evaluating structural integrity of cast Al-7% Si-Mg alloys via work hardening characteristics: 1. Concept of target properties. Materials Science and Engineering A, 2004.
• [5] D. Dispinar, Determination of the melt quality of aluminum and its alloys, PhD, University of Birmingham, UK, January 2005.
• [6] W. La-Orchan, Quantification of the reduced pressure test, PhD Thesis McGill University, Montreal, Canada, 1994.