Examples of thermal derivative gradient analysis (TDGA) application

• Autorzy: Cholewa M. , Suchoń J. , Kondracki M.
• Języki publikacji: EN

Abstrakty

EN

The study presents the possibility of TDGA method based on multipoint measurement of temperature during crystallization of two test castings poured from different temperature. Sample castings have conical shape. Temperature measurement is carried out in six cone cross-sections between the heat axis and the surface of the mould cavity. The multichannel recording device allows describing the thermal derivative after time and direction. Presented examples of the assessment of kinetics of crystallization for alloys: AlSi11, CuSn8 and GJL 200 cast iron. Based on quantitative analysis of the microstructure (DAS, fig. 1 and tab.1) examples of relations were prepared, describing the mechanical and structural properties in function of crystallization kinetics parameters - DAS = f(vchł) DAS = f(\delta(dT/dt)/dt) HV = f(Gy) Rm = f(\delta(dT/dt)/dt) as shown in fig. 2 and 4. The evaluation of crystallization process was also conducted for AlSi11 skeleton castings. Pointed out was the universality of the method with respect to the mathematical interpretation of the results and its limitations due to data registration extracted from multiple thermocouples. Based on the conducted studies, the method can be applied in the industry as well as in the experimental practice.

Słowa kluczowe

EN

crystallization; thermal derivative gradient analysis; AlSi; CuSn; cast iron; cast skeleton

PL

krystalizacja; analiza termiczna; Al-Si; CuSn; żeliwo

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 4
• Strony: 23--30
• Opis fizyczny: Bibliogr. 34 poz., rys., tab., wykr.

Twórcy

autor

Cholewa M.

autor

Suchoń J.

autor

Kondracki M.

• Foundry Department, Silesian University of Technology, Towarowa 7, 44-100 Gliwice, Poland,

Bibliografia

• [1] Fraś E: Crystallization of metals. WNT, Warszawa 2003 (in Polish).
• [2] Braszczyński J.: Crystallization of castings. WNT Warszawa 1991 (in Polish).
• [3] Mollard F., Flemings M.: Tranp. of the Metall. Sci. AIME, v. 239, 1967, p. 1526.
• [4] Flemings M.: Solidification processing, Met. Tranp., vol,5, 1974, p. 2121.
• [5] Burden M. H., Hunt J. D., J. Cryst. Growth, Tranp., vol. 22, 1974, p. 109.
• [6] Toluoi B., Hellawell A.: Acta Metall., v. 24, 1976, p. 565.
• [7] Kurtz W.,Fisher D. J.: Acta Metall., v. 28, 1980, p. 777.
• [8] Kac A. M.: Lit. Proizw., v. 7, Moskwa, 1980, p. 2. (in Russian).
• [9] Fraś E.: Theoretical fundamentals of crystallization. vol.1 Metals and single-phase alloys, Wyd. AGH, Kraków, 1984 (in Polish).
• [10] Miyata Y., Suzuki T., Uno J.: Metall. Tranp. v. 16A, 1985, p. 1799.
• [11] Braszczynski J.: Theory of casting processes, PWN, Warszawa, 1989 (in Polish).
• [12] Liu J., Zhan Y., Shang B.: Acta Metall. Mater., v. 38, 1990, p. 1625.
• [13] Fraś E., Solidification of metals and alloys, PWN, Warszawa, 1992. (in Polish).
• [14] Jaquet J. C., Hotz W.: Cast Metals, v. 4, nr 4, 1992, p. 200.
• [15] Khan P., Ourdjini A., Eliot R.: Mater. Sci. Technol. v. 8, 1992, p. 516.
• [16] Khan P., Eliot R.: Acta Metall. Mater., v. 41, 1993, p. 2433.
• [17] Schindelbacher G.: Gießerei - Praxis, v. 17, 1995, p. 309. (in German).
• [18] Górny Z., Sobczak J.: Cast composites, red. J. Suchy, Comission 8.1. Cast Composites, CIATF, Opole, 1995, p. 39.
• [19] Braszczyński J. ,Zyska A.: Arch. Techn. Masz. i Autom., v.18 nr specj., Poznań, 1998, p. 98. (in Polish).
• [20] Majchrzak E., Mochnacki B., Suchy J. P.: Int. J. Cast Metals Rep., 1999, nr 12, p. 241.
• [21] Majchrzak E., Mochnacki B., Suchy J.P.: 5 th World Conf. on the Comp. Modell. of Free end Mov. Bound. Probl. Moving Boundaries, Ljubljana, Slovenija, 1999, p. 37.
• [22] Ares A. E., Schvezov C. E.: Metall. And Mater. Tranp.v. 31A, 2000, p. 1611.
• [23] Odorizzi P. et al.: Servizi Grafici Edytoriali, Padva, Italy, 2001.
• [24] Brown P., Spittle J. A., Janes J. D.: J.of Mater., 2002, p. 45.
• [25] Hajkowski M.: Prognozowanie właściwości mechanicznych odlewów, Wyd. Pol. Pozn., Rozprawy nr 376, Poznań, 2003. (in Polish).
• [26] www.mse.mtu.edu.aluminium-silicon alloy castings, 2005.
• [27] Cholewa M.: Solidification kinetics of dispersive composites, Wyd. Pol. Śl., Scientific Works, no. 151, 2005. (in Polish).
• [28] Jura S.: Novel methods of alloy quality evaluation, PAN Katowice, 1985, p. 69 (in Polish).
• [29] Cholewa M.: Arch. Techn. Masz. i Autom, PAN, Poznań, 2004, vol 24, no. 1, p. 39. (in Polish).
• [30] Cholewa M.: Kompozyty, vol 4, nr 2(22), PTMK, Częstochowa, 2004, p. 444 (in Polish).
• [31] Cholewa M.: Archives of Foundry, vol. 22, 2006, p. 111 (in Polish).
• [32] Cholewa M.: Innowation in foundry engineering, vol. I, Wyd. Inst. Odl., Kraków, 2007, p. 169 (in Polish).
• [33] www.zjura.sownet.pl/z-tech, 2008 (in Polish).
• [34] Cholewa M.: Archives of Foundry Engineering, vol. 8/3, 2008 p.84.