Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
In the papers issue of production the synthetic cast iron obtaining on the basis of only steel scrap and carburizing materials are presented. Natural graphite, synthetic graphite, anthracite, petroleum coke, foundry coke and charcoal were used to carburization. Examinations covered evaluation of used carburizers taking into account chemical composition; carbon, sulphur and nitrogen content have been analyzed. Obtained effectiveness of carburization with method of inserting carburizing material into charge in solid, were especially taken into considerations. The comparison between mechanical properties (tensile strength and hardness) of produced synthetic cast iron and cast iron obtained on the basis of pig iron have been carried out.
Czasopismo
Rocznik
Tom
Strony
249--254
Opis fizyczny
Bibliogr. 10 poz., tab., wykr.
Twórcy
autor
autor
autor
- Department of Foundry, Silesian University of Technology, 44-100 Gliwice, Poland, krzysztof.janerka@polsl.pl
Bibliografia
- [1] K. Skoczkowski; Wykładziny węglowo-grafitowe, Fundacja im. W. Świętosławskiego na Rzecz Wspierania nauki i Rozwoju Potencjału Naukowego w Polsce Gliwice 1998.
- [2] M. Lebiedziejewski, M. Szudek; Wyroby z węgla i grafitu, WNT Warszawa, 1970.
- [3] H. O. Pierson; Handbook of carbon, graphite, diamond and fullerenes. Properties, processing and applications, 1993, William Andrew Publishing/Notes.
- [4] Cz. Podrzucki: Żeliwo-struktura, właściwości, zastosowanie, Wyd. ZG STOP, Kraków 1991.
- [5] K. Janerka, D. Bartocha, J. Szajnar, M. Cholewa; The influence of different kind of carburizers and carburization on the effectiveness and iron structure, Archives of Metallurgy and Materials,52,2007,467-474.
- [6] K. Janerka; The rate and effectiveness of carburization to the sort of carburizer, Archives of Foundry Engineering, PAN Katowice, nr 7, 2007, 95-100.
- [7] K. Janerka, D. Bartocha; The sort of carburization and the quality of obtained cast iron, Archives of Foundry Engineering, v. 8, 4/2008, s. 55-60.
- [8] W. Babiarz, D. Homa, K. Janerka, H. Niburski: Nawęglanie stopów żelaza urządzeniami systemu Polko w ABB Zamech Ltd., Przegląd Odlewnictwa, 1997, t. 47, nr 12.
- [9] M. Kanafek, D. Homa, K. Janerka: Nawęglanie żeliwa w Odlewni TEKSID Poland S.A. za pomocą urządzenia pneumatycznego POLKO, Przegląd Odlewnictwa, 1999, nr 7.
- [10] J. Kokoszka, J. Markowski, K. Janerka, J. Jezierski, D. Homa, W. Chmielorz: Pmeumatyczne nawęglanie żeliwa w warunkach WSK "PZL - RZESZÓW" S.A., Krzepnięcie Metali i Stopów, PAN Katowice, v.1, nr 41, 1999, s. 53-58.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BPZ1-0071-0045