Bainitic nodular cast iron with carbides obtaining with use of Inmold method

• Autorzy: Gumienny G.
• Języki publikacji: EN

Abstrakty

EN

In these paper bainitic nodular cast iron with carbides as-cast obtaining has been presented. This cast iron has been obtained with use of Inmold method. It was shown, that there is the possibility of bainite and carbides obtaining in cast iron with Mo and Ni for studied chemical composition.

Słowa kluczowe

EN

innovative foundry technologies; innovative foundry materials; TDA method; nodular cast iron; carbides; bainite

PL

materiały innowacyjne; technologie innowacyjne; metoda TDA; żeliwo sferoidalne; węglik; bainit

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 3
• Strony: 243--248
• Opis fizyczny: Bibliogr. 6 poz., rys., tab., wykr.

Twórcy

autor

Gumienny G.

• Department of Materials Technologies and Production Systems, Technical University of Łódź Stefanowskiego 1/15 Street, 90-924 Łódź, Poland,

Bibliografia

• [1] S. Pietrowski, G. Gumienny, Nodular cast iron with carbides, Archives of Foundry Engineering, No 19 (2006) 233-238 (in Polish).
• [2] S. Pietrowski, G. Gumienny, Crystallization of nodular cast iron with Mo, Cr, Cu and Ni, Archives of Foundry Engineering, No 22 (2006) 406-413 (in Polish).
• [3] S. Pietrowski, G. Gumienny, Carbides in Nodular Cast Iron with Cr and Mo, Archives of Foundry Engineering, Vol. 7, Issue 3 (2007) 223-230.
• [4] S. Pietrowski, G. Gumienny, Crystallization of nodular cast iron with carbides, Archives of Foundry Engineering, Vol. 8, Issue 4 (2008) 236-240.
• [5] S. Pietrowski, Bainitic ferrite with austenite or bainitic nodular cast iron, Archives of Materials Science, Vol. 18, No 4 (1997) 253-273.
• [6] S. Pietrowski, The influence of the chemical composition of nodular cast steel and cast iron and casting cooling rate on the austenite transformation to acicular structures, Scientific Books No 94, Łódź 1987 (in Polish).