Usage of ATND method to determination of mechanical properties of AlMg10 alloy with complex additive of SbNiCr

• Autorzy: Pezda J.
• Języki publikacji: EN

Abstrakty

EN

Aluminum alloys with magnesium are commonly used in foundry industry due to lower density and higher corrosion resistance, comparing with silumins. Complicated shapes of produced alloys, differences in wall thickness and operation under changing loads require performing quality control as early as in stage of their preparation (melting). To register crystallization processes and monitor a phenomena arisen in result of the crystallization, are implemented methods based on analysis of temperature change (ATD, DTA). In the paper is present an attempt of usage of the ATND method (Thermal-Voltage-Derivative Analysis) to registration of crystallization process of the investigated alloy. Obtained results concern registration of the crystallization process, strength and fatigue tests of the material, and visual observation of morphology of alloy's fracture after static tensile test. Performed regression analysis has enabled implementation of changeable values of characteristic points of the ATND method to estimation of mechanical properties of the AlMg10 alloy with SbNiCr additive.

Słowa kluczowe

EN

aluminium alloys; mechanical properties; crystallization; ATND

PL

stop aluminium; właściwości mechaniczne; krystalizacja; metoda ATND

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 3
• Strony: 115--120
• Opis fizyczny: Bibliogr. 17 poz., rys., tab., wykr.

Twórcy

autor

Pezda J.

• Faculty of Chipless Forming Technology, University of Bielsko-Biała, Willowa 2, 43-300 Bielsko-Biała, Poland,

Bibliografia

• [1] P. Wasilewski, Silumins - Modification and its impact on structure and properties, PAN Solidification of metals and alloys, Zeszyt 21, Monografia, Katowice 1993r.
• [2] S. Pietrowski, Silumins, Wydawnictwo Politechniki Łódzkiej, Łódź 2001 (in Polish).
• [3] Z. Górny, Casting non-ferrous metal alloys, WNT, Warszawa 1992 (in Polish).
• [4] G. Adamski, T. Piwowarczyk, Metallurgy and casting non-ferrous metals. Aluminum and magnesium alloys, Wydawnictwo AGH Kraków 1986.
• [5] I. J. Polmear, Recent developments in light alloys, Materials Transactions, JIM Volume 37, Issue 1, 1996, 12-31.
• [6] E. Aghion, B. Bronfin, Magnesium Alloys Development towards the 21st Century, Material Science Forum, vol. 350-351, Trans Tech Publications, Switzerland 2000, 19-30.
• [7] Luhong Wang, Haozhe Li , The microstructural evolution of Al12Mg17 alloy during the quenching processes, Journal of Non-Crystalline Solids 352 (2006) 2880-2884.
• [8] J. Sobczak, P. Darłak, R. M. Purgert, N. Sobczak, A. Wojciechowski, The Technological Aspects of ALFA Composites Sythesis, Int. Symp. Solidification Processing of Metal Matrix Composites, TMS 135th Annual Meeting, San Antonio, USA, Abstarct Book, p.91.
• [9] S. Valdez, B. Campillo, R. Pérez, L. Martínez, A. García H., Synthesis and microstructural characterization of Al-Mg alloy-SiC particle composite, Materials letters, vol 62, Iss. 17-18, 2008.
• [10] J. Braszczyński, M Cisowska, Attempting to assess the coagulation hybrid composites AlMg / SiC + C, Solidification of Metals and Alloys, vol 1, No 40/1999 75-86 (in Polish).
• [11] M. Łągiewka, Z. Konopka, A. Zyska, Solidification suspension + SiC composite AlMg10 when filling a cavity forms, Archive of Machinery and Automation Technology, vol. 26, No 1 2006, 57-63 (in Polish).
• [12] S. Pietrowski, G. Gumienny, P. Pisarek, Production monitoring of ductile cast iron under foundry conditions, Archives of Foundry, vol. 3, No. 19/2006 239-250 (in Polish).
• [13] S. Pietrowski, Crystallization of silumins in aspect of valuation with ATD method, Przegląd Odlewnictwa 1994.
• [14] P. Wasilewski, Comparison methods of solidification and crystallization alloys of metals, Archives of Foundry, vol. 3, No. 10/2003 323-337 (in Polish).
• [15] J. Pezda, Mechanical properties of the AK132 alloys determination on the ATND method, Archives of Foundry, R 6, nr 19 (2006) 221-226.
• [16] J. Pezda: Tensile strength of the AG10 alloys determination on the ATND method, Archives of Foundry, R. 6, nr 18 (1/2) (2006) 197-202.
• [17] J. Pezda, Determination of impact strengh of AK9 silumin on base of ATND method, Archives of Foundry Engineering, Vol.8 Special Iss.1 (2008) 269-272.