Application of laser optical displacement sensor to foundry processes control and research

• Autorzy: Mutwil J. , Janowski R.
• Języki publikacji: EN

Abstrakty

EN

An experimental set-up elaborated for distance measurement with a use of a laser optical displacement sensor has been described. The features of the elaborated device allow to measure a surface roughness and dimensions of small details. Elaborated computer software allows automatically to estimate the classical surface roughness indices. The surface roughness indices can be estimated also for sloping planes. A solidification surface profile in macro and micro scale can also be measured. The mentioned solidification surface profile is measured on solidified shells obtained by using of so-called remove remainder test. Exemplary measurements of mould and casting surface roughness have been presented.

Słowa kluczowe

EN

laser technique; experimental set-up; dimension control; surface roughness; solidification surface profile

PL

technika laserowa; instalacja doświadczalna; kontrola wymiarowa; chropowatość powierzchni; profil powierzchni

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 3
• Strony: 103--108
• Opis fizyczny: Bibliogr. 7 poz., rys., wykr.

Twórcy

autor

Mutwil J.

autor

Janowski R.

• Department of Mechanical Engineering, University of Zielona Góra, ul. prof. Z. Szafrana 4, 65-516 Zielona Góra

Bibliografia

• [1] L. D. Chiffre, H. N. Hansen, R. E. Merece, Comparison of coordinate measuring machines using an optomechanical hole plate, CIRP Annals- Manufacturing Technology, Vol. 54, Issue 1 (2005) 479-482.
• [2] H. Y. Kim, Y. F. Shen, J. H. Ahn, Development of surface roughness measurement system using reflected laser beam, Journal of Materials Processing Technology 130-131 (2002) 662-667.
• [3] D. J. Whitehouse, Comparison between stylus and optical methods for measuring surfaces, CIRP Annals- Manufacturing Technology, vol. 37, Issue. 2 (1988) 649-653.
• [4] C. S. Lee, S. W. Kim, D. Y. Yim, An in-process measurement technique using laser for non-contact monitoring of surface roughness and form accuracy of ground surfaces, CIRP Annals- Manufacturing Technology, vol. 36, Issue 1 (1987) 425-428.
• [5] J. Mutwil, R. Janowski, Application of laser optical displa-cement sensor for analysis of metal stream solidification surface profile in mould channel, Archives of Foundry Engineering, vol. 8, Issue 3 spec. (2008) 63-68.
• [6] J. Mutwil, Assessment of physical-chemical phenomenon occurring during metal filling of foundry mould, Monograph No 63, Publishing house of WSI in Zielona Góra, 1992 (in Polish).
• [7] J. Mutwil, M. Żygadło, R. Janowski, D. Niedźwiecki, New experimental setup for fluidity investigation, Solidification of metals and alloys, Vol. 2, No 44 (2000) 497-502 (in Polish).