Thin Wall Austempered Ductile Iron (TWADI)

• Autorzy: Fraś E. , Górny M.
• Języki publikacji: EN

Abstrakty

EN

In this paper the analysis of thin walled castings made of ductile iron is considered. It is shown that thin wall austempered ductile iron can be obtained by means of short-term heat treatment of thin wall castings without addition of alloying elements. Metallographic examinations of 2 mm thin walled castings along with casting with thicker wall thickness (20x28 mm) after different austempring conditions are presented. It has been proved that short-term heat treatment amounted 20 minutes of austenitizing at 880 oC followed by holding at 400 oC for 5 minutes causes ausferrite matrix in 2 mm wall thickness castings, while casting with thicker wall thickness remain untransformed and martensite is still present in a matrix. Finally there are shown that thin wall ductile iron is an excellent base material for austempering heat treatments. As a result high mechanical properties received in thin wall plates made of austempered ductile iron.

Słowa kluczowe

EN

innovative foundry technologies; innovative foundry materials; metallography; thin wall ductile iron

PL

innowacyjne technologie odlewnicze; innowacyjne materiały odlewnicze; metalografia; odlewanie cienkościenne; żeliwo sferoidalne

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 3
• Strony: 45--48
• Opis fizyczny: Bibliogr. 13 poz., rys., wykr.

Twórcy

autor

Fraś E.

autor

Górny M.

• Department of Cast Alloys and Composites Engineering, AGH University of Science and Technology, Reymonta 23, 30-065 Kraków, Poland,

Bibliografia

• [1] D. M. Stefanescu, L. P. Dix, R. E. Ruxanda, C. Corbitt-Coburn, T.S. Piwonka, Tensile properties of thin wall ductile iron, AFS Transactions, vol. 110, (2002) 1149 - 1162.
• [2] K. L. Hayrynen K. R. Brandenberg, Carbidic Austempered Ductile Iron (CADI) - the New Wear Material, AFS Transactions, vol. 111, (2003) 845-850.
• [3] D. Venugopolan, A kinetic model of the γ to α + Gr eutectoid transformation in spheroidal graphite cast iron, Metallurgical and Materials Transactions, vol. 21A, (1990) 913-918.
• [4] D. J. Moore, J. R. Parolini, K. B. Rundman, On the kinetics of austempered gray cast iron, AFS Transactions, vol. 111, (2003) 911-930.
• [5] S. M. Butorabi, A. A. Fallah, Austempering kinetics of low carbon-aluminium cast iron, AFS Transactions, vol. 105, (1997) 757-761.
• [6] K. F. Laneri, J. Desimoni, R. C. Marcader, R. W. Gregorutti J. L. Satutti, Thermal dependence of austempering transformation kinetics of compacted graphite cast iron, Metallurgical and Materials Transactions A, vol. 32, (2001) 511-558.
• [7] M. M. Cisneros, M. J. Perez, R. E. Campos, E. Valdes, The role of Cu, Mo and Ni on the bainitic reaction during the austempering of ductile iron, International Journal of Cast Metals Research, vol. 111, (1999) 425-430.
• [8] J. Mallia, M. Grech, Effect of silicon content on impact properties of austempered ductile iron, Material Science and Technology, vol. 113, (1997) 408-414.
• [9] N. Darwish, R. Elliot, Austempering of low manganese ductile irons. Part 3. Variation of mechanical properties with heat treatment conditions, Material Science and Technology, vol. 9, (1993) 882-889.
• [10] K. L. Hayrynen, J. K. Keough, Wear properties of austempered ductile irons, AFS Transactions, vol. 113, (2005) 803-812.
• [11] F. Zanardi, Machinable ADI in Italy, AFS Transactions, vol. 113, (2005) 835-847.
• [12] B. N. Olson, K. B. Moore, G. R. Simula, Potential for practical applications of ausforming austempered ductile iron, AFS Tansactions, vol. 111, (2002) 965-982.
• [13] R. L. Fullman, Measurement of particle sizes in opaque bodies, Transactions of AIME, (1953) 447-452.