The analysis of the possibility of the application of the casting waxes in the process RP

• Autorzy: Budzik G.
• Języki publikacji: EN

Abstrakty

EN

The article presents analysis of possibility of application of casting waxes in process of rapid prototyping of casting models in silicone the matrices. The researches were made on casting waxes applied to the manufacturing of precise casting models and also the model system. Testing waxes are intended nominally to the processing in process of the injection. The determining of possibility processing of waxes in silicone forms was purpose of researches. Researches concerned of whole manufacturing process i.e. the preparation of the form and wax, the filling of form and also the deforming. As a result of made researches the temperature of filling of matrix was determined. The main part of research process concerned determining of temperature of deforming for every with kinds of waxes. This is especially important in case of manufacturing of casting models of precise elements, which can be destroyed easily. In this purpose researches of the bending of waxen forms were made in the range of temperature 20-37oC. The processing parameters of casting waxes were determined as a result of made researches.

Słowa kluczowe

EN

mechanical properties; casting waxes; rapid prototyping; silicone matrices

PL

właściwości mechaniczne; wosk odlewowy; szybkie prototypowanie; matryca silikonowa

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 2
• Strony: 133--136
• Opis fizyczny: Bibliogr. 15 poz., rys., tab., wykr.

Twórcy

autor

Budzik G.

• Department of Machine Design, University of Technology in Rzeszów, Avenues Powstańców Warszawy 8, 35-959 Rzeszów,

Bibliografia

• [1] N. Homburg, E. Wellbrock, Knowledge - Based manufacturing strategy and methods for foundries, Conference and Exhibition for Rapid Technology, Erfurt 2006.
• [2] R. Hartym, Dimensional accuracy of investment casting for the burned pattern process, Archives of Foundry, Volume 6, No18 (2/2), (2006) 231-236 (in Polish).
• [3] R. Haratym, J. Tomasik, The influence of ceramic mould quality on surface geometry of al investment casting, Archives of Foundry, Volume 6, No18 (2/2), (2006) 237-242 (in Polish).
• [4] D. Myszka, J. Modzelewski, M. Leśniwski, A. Karwiński, Introduction to titanium investment casting as implants use, Archives of Foundry, Volume 6, No18 (2/2), (2006) 237-242 (in Polish).
• [5] M. Oleksy, M. Heneczkowski, G. Budzik, Composites of unsaturated polyester resins applied in Vacuum Casting technology, POLIMERY 2008, 53, nr 2, s. 60-63.
• [6] G. Budzik, Properties of made by different methods of RP impeller foundry patterns, Archives of Foundry Engineering, Vol. 7, Issue 2/2007, s. 83-86.
• [7] G. Budzik, T. Markowski, M. Sobolak: Hybrid foundry patterns of bevel gears. Archives of Foundry Engineering, Vol. 7, Issue 1/2007, s. 131-134.
• [8] T. Wohlers, Wohlers Report 2008 - State of the Industry, Annual Worldwide Progress Report. Wohlers Associates Inc., Fort Collins, CO, USA 2008.
• [9] A. Gebhardt, Rapid Prototyping, Carl Hanser Verlag, Munich 2003.
• [10] Z. Gajdoš, J. Slota, E. Spišák, Visualisation of FDM prototypes, ICAT 2008, 2nd International Conference on Additive Technologies : DAAAM Specialized Conference: September 17th -19th, 2008, Ptuj, Slovenia: Proceedings. Vienna: DAAAM International, 3 p. ISBN 3-901509-72-0.
• [11] I. Gajdoš, J. Slota, E. Spišák, FDM prototypes virtual modeling, ICAT 2008, 2nd International Conference on Additive Technologies: DAAAM Specialized Conference: September 17th -19th, 2008, Ptuj, Slovenia: Proceedings. Vienna: DAAAM International, 3 p. ISBN 3-901509-72-0.
• [12] G. Budzik, Possibilities of utilizing 3DP technology for foundry mould making, Archives of Foundry Engineering, Vol. 7, Issue 2/2007, s. 65-68.
• [13] W. Liu, Rapid Prototyping and engineering applications - a toolbox for prototype development, Taylor & Francis Group, 2008.
• [14] Q. Liu, G. Sui, M.C. Leu: Experimental study on the ice pattern fabrication for the investment casting by rapid freeze prototyping (RFP), Computers in Industry 48 (2002), Elsevier, s. 181-197.
• [15] J. C. Feriera, E. Santos, H. Madureira, J. Castro, Integration of VP/RP/RT/RE/RM for rapid product and process development, Rapid Prototyping Journal Vol. 12 No. 1/2006, Emerald 2006, 18-28.