Phase transformations and microstructure of IN-713C nickel superalloy

• Autorzy: Binczyk F. , Śleziona J.
• Języki publikacji: EN

Abstrakty

EN

The study presents the results of investigations of phase transformations taking place during melting and solidification and of microstructural examinations carried out on the family of IN 713C nickel superalloys. Examinations were carried out by the method of thermal analysis (ATD) and differential scanning calorimetry (DSC). It has been concluded that the method of thermal analysis (ATD) enables more precise assessment of the precipitation of the primary phases of a low value of the solidification enthalpy. The advantage of DSC is the possibility of determination of the value of the heat (enthalpy) of phase transformations during alloy melting and solidification. The measured parameters of Tlik and Tsol are comparable for both methods. Microstructural examinations have confirmed the phenomena accompanying phase transformations, i.e. the precipitation of primary carbides, the solidification of [...] phase matrix and carbide eutectic, and the formation of [...] phase in solid state.

Słowa kluczowe

EN

nickel superalloys; ATD analysis; DSC analysis; temperature; solidification; microstructure; carbides

PL

nadstop niklu; temperatura; krzepnięcie; mikrostruktura; węglik

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 2
• Strony: 109--112
• Opis fizyczny: Bibliogr. 9 poz., rys., tab., wykr.

Twórcy

autor

Binczyk F.

autor

Śleziona J.

• Chair of Metal Alloys and Composites Engineering Silesian University of Technology, Krasińskiego Str. 8, 40-019 Katowice, Poland,

Bibliografia

• [1] F. Zupanic, T. Boncina, A. Krizman, F. D. Tichelaar: Structure of continuously cast Ni-based superalloy Inconel 713C, Journal of Alloys and Compounds, v. 329, issue 1-2, (2001), pp.290-297.
• [2] M. Tabuchi, K. Kubo, K. Yagi, A. T. Yokobori Jr, A. Fuji: Results of a Japanese round robin on creep crack growth evaluation methods for Ni-base superalloys, Engineering Fracture Mechanics, volume 62, issue 1, (1999), pp. 47-60.
• [3] Superalloys, Metal Powder Report, v. 51, issue 9, (1996), p.39.
• [4] A. Smith, A. Mainwood, M. Watkins: The kinetics of the capture of nitrogen by nickel defects in diamond, Diamond and related materials, v. 11, issue 3-6, (2002), pp. 312-315.
• [5] M. Lachowicz: Characteristics of microstructural changes and crack formation mechanism detected during welding and heat treatment of Inconel 713C superalloy, Doctor's Thesis, Politechnika Wrocławska (2006) (in Polish).
• [6] Hartman D., Muerrle U., Reber G.: The effects of electron beam refining on the castability of IN 713 C, Metal, (1992), issue 5, pp. 443-447.
• [7] L. Liu, T. Huang, Y. Xiong: Grain refinement of superalloy K4169 by addition of refineries cast structure and refinement mechanisms, Materials Science and Engineering A, 394, (2005), pp.1-8
• [8] Y. Xiong, J. Du, X. Wie, A. Yang, L. Liu: Grain refinement of Superalloy IN 718C by the addition of Inoculants, Metallurgical and Materials Transactions A, vol. 35A, July (2004), pp. 2111-2114.
• [9] Y. Xiong, A. Yang, Y. Guo, W. Liu, L. Liu: Grain refinement of superalloys K3 and K4169 by the addition of refineries, Science and Technology of Advanced Materials, issue 2, (2001), pp. 13-17.