Calorimetric examination of mixtures for modification of nickel and cobalt superalloys

• Autorzy: Binczyk F. , Śleziona J. , Przeliorz R.
• Języki publikacji: EN

Abstrakty

EN

The study presents the results of thermodynamic calculations and calorimetric examination of thermal reactions taking place at high temperatures between the nanoparticle inoculants and metallic constituents of nickel and cobalt superalloys. The calculations and measurements were made for different compositions, containing cobalt aluminate CoAl2O4, cobalt oxide CoO*Co2O3, zircon flour ZrSi2O4, powdered and metallic Al, powdered Ti, and IN-713C alloy. The obtained results have indicated the possibility of using certain mixtures as potential inoculating additives for the volume modification of nickel and cobalt superalloys. A characteristic feature of these alloys is the formation of a detrimental structure containing very large columnar crystal, present even in castings of a very high solidification rate. It has been proved that the inoculant most effective in the formation of the structure of equiaxial grains is the inoculant based on cobalt aluminate, colloidal silica and powdered aluminium.

Słowa kluczowe

EN

nickel superalloys; DSC analysis; temperature; modification; macrostructure; inoculant

PL

nadstop niklu; temperatura; modyfikowanie; makrostruktura; modyfikator

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 2
• Strony: 97--100
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Binczyk F.

autor

Śleziona J.

autor

Przeliorz R.

• Chair of Metal Alloys and Composites Engineering Silesian University of Technology, Krasińskiego Str. 8, 40-019 Katowice, Poland,

Bibliografia

• [1].F. Zupanic, T. Boncina, A. Krizman, F.D. Tichelaar: Structure of continuously cast Ni-based superalloy Inconel 713C, Journal of Alloys and Compounds, v. 329, issue 1-2, (2001), pp.290-297.
• [2] M.Tabuchi, K. Kubo, K. Yagi, A.T. Yokobori Jr, A. Fuji: Results of a Japanese round robin on creep crack growth evaluation methods for Ni-base superalloys , Engineering Fracture mechanics, volume 62, issue 1, (1999), pp. 47-60.
• [3] Superalloys, Metal Powder Report, v. 51, issue 9, (1996), p.39.
• [4] A. Smith, A. Mainwood, M. Watkins: The kinetics of the capture of nitrogen by nickel defects in diamond , Diamond and related materials, v. 11, issue 3-6, (2002), pp. 312-315.
• [5] M. Lachowicz: Characteristics of microstructural changes and crack formation mechanism detected during welding and heat treatment of Inconel 713C superalloy, Doctor's Thesis, Politechnika Wrocławska (2006).
• [6] Hartman D., Muerrle U., Reber G.: The effects electron beam refining on the cast ability of IN 713 C, Metal, (1992), issue 5, pp. 443-447.
• [7] L. Liu, T. Huang, Y. Xiong: Grain refinement of superalloy K4169 by addition of refineries cast structure and refinement mechanisms, Materials Science and Engineering A, 394, (2005), pp.1-8.
• [8] Y. Xiong, J. Du, X. Wie, A. Yang, L. Liu: Grain refinement of Superalloy IN 718C by the addition of Inoculants, Metallurgical and Materials Transactions A, vol. 35A, July (2004), pp. 2111-2114.
• [9] Y. Xiong, A. Yang, Y. Guo, W. Liu, L. Liu: Grain refinement of superalloys K3 and K4169 by the addition of refineries, Science and Technology of Advanced Materials, issue 2, (2001), pp. 13-17.
• [10] W. Jin, F. Bai, T.Li, G. Yin,: Grain refinement of superalloy IN100 under the action of rotary magnetic fields and inoculants, Material Letters 62 (2008), pp.1585-1588.
• [11] W. Seok Cho, M. Kakihana: Crystallization of ceramic pigment CoAl2 O4 nanocrystals from Co-Al metal organic precursor, Journal of Alloys and Compounds, 287, 1999, pp. 87-90.
• [12] A. Sirijaruphana, A. Horváth, J. G. Goodwin: Cobalt aluminate formation in alumina-supported cobalt catalysts: effects of cobalt reduction state and water vapor, Catalysis Letters Vol. 91, Nos. 1-2, November 2003.
• [13] HSC Chemistry Ver.(4), Copyright (C), Outokumpu Research Oy, Pori, Finland, A. Roine.
• [14] L. Liu, R. Zhang, L. Wang: A new method of fine grained casting for nickle-base superalloys, Journal of Materials Processing Technology, 77, 1998, pp. 300-304.