Microstructure of high-pressure die-casting AM50 magnesium alloy

• Autorzy: Braszczyńska-Malik K. N. , Dąbrowski R. , Braszczyński J.
• Języki publikacji: EN

Abstrakty

EN

Microstructure analyses of high-pressure die-casting AM50 magnesium alloy are presented. Investigated pressure casting was produced on a cold chamber die-casting machine with locking force at 1100 tones in 'FINNVEDEN Metal Structures'. Light microscopy and X-ray phase analysis techniques were used to characterize the obtained material. In microstructure, an \alfa-Mg solid solution, Al12Mg17 and Al8Mn5 intermetallic compounds were observed. Different structural constitutes, which consist impurities, were not disclosed.

Słowa kluczowe

EN

AM50 magnesium alloy; high pressure die casting; microstructure

PL

stop magnezu; wysokie ciśnienie; odlewanie kokilowe; mikrostruktura

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 2
• Strony: 53--56
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Braszczyńska-Malik K. N.

autor

Dąbrowski R.

autor

Braszczyński J.

• Częstochowa University of Technology, Institute of Materials Engineering, al. Armii Krajowej 19, 42-200 Częstochowa, Poland,,

Bibliografia

• [1] Mordike B. L., Ebert T.: Magnesium properties-applicationspotential, Materials Science and Engineering A, 2001, Vol. 302, 37-45.
• [2] "Magnesium Alloys and Their Applications", WILEY-VCH, Edited by K.U. Kainer, 1998.
• [3] "Magnesium Alloys and Their Applications", WILEY-VCH, Edited by K.U. Kainer, 2000.
• [4] "Magnesium Alloys and Their Applications", WILEY-VCH, Edited by K.U. Kainer, 2003.
• [5] Braszczyńska-Malik K. N., Studium kształtowania mikrostruktury stopów magnez-aluminium, Wyd. WIPMiFS PCz., Częstochowa, 2005 (in Polish).
• [6] El-Mahallawy N. A, Taha M. A., Pokora E., Klein F., On the influence of the process variables on the thermal conditions and properties of high pressure die-cast magnesium alloys, J. of Mater. Pro. Tech., 73 (1998) 125-138.
• [7] Gutman E. M., Unigovski Y., Levkovich M., Koren Z., Aghion E., Dangur M., Influence of technological parameters of permanent mold casting and die casting on ceep and strength of Mg alloy AZ91D, Mater. Sc. And Eng., A234-236 (1997) 880-883.
• [8] Dahle A. K., Sannes S., John D. H., Westengen H., Formation of defect bands in high pressure die cast magnesium alloys, J. Light Met., 1 (2001) 99-103.
• [9] Unigovski Y. B., Butman E. M., Surface morphology of a diecast Mg alloy, App. Sur. Sc., 153 (1999) 47-52.
• [10] Tong K. S., Hu B. H., Niu X. P., Pinwill I., Cavity pressure measurements and process monitoring for magnesium die casting of a thin-wall hand-phone component to improve quality, J. of Mater. Proc. Tech., 127 (2002) 238-241.
• [11] Braszczyńska-Malik K. N., Walczak W., Braszczyński J, The new foundry line for magnesium alloys high-pressure die-casting, Arch. Found. Eng., 8, 1 (2008) 27-30.
• [12] Braszczyńska-Malik K. N., Zawadzki I., Walczak W., Braszczyński J, Mechanical properties of high-pressure diecasting AZ91 magnesium alloy, Arch. Found. Eng., 8, 4 (2008) 15-18.
• [13] Hydro Magnesium: Magnesium die casting, HM Technical Brochure, Hydro Media, 08, 2002.
• [14] Wang R. M., Eliezer A., Gutman E. M., An investigation on the microstructure of an AM50 magnesium alloy, Mater. Sc. Eng., A355 (2003) 201-207.