Austenitic ductile iron for low temperature applications

• Autorzy: Tabor A. , Putyra P. , Zarębski K. , Maguda T.
• Języki publikacji: EN

Abstrakty

EN

The study presents the results of mechanical tests carried out on austenitic ductile iron with varied nickel content and additions of chromium and vanadium. The tests and investigations were carried out over a wide range of temperatures, i.e. from -196oC to +20oC, and included determination of the yield strength, tensile strength, reduction of area and elongation. Additionally, the microstructure of different cast iron types was examined, along with the factographic examinations of specimens subjected to the tensile test. In final part of the study, the obtained results were discussed and relevant conclusions were drawn.

Słowa kluczowe

EN

mechanical properties; ductile iron; austenite

PL

właściwości mechaniczne; żeliwo sferoidalne; austenit

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 1
• Strony: 163--168
• Opis fizyczny: Bibliogr. 14 poz., rys., tab., wykr.

Twórcy

autor

Tabor A.

autor

Putyra P.

autor

Zarębski K.

autor

Maguda T.

• Training and Organisation Centre of Quality Systems, Cracow University of Technology, al. Jana Pawła II nr 37, 31-864 Kraków, Poland,

Bibliografia

• [1] C. Podrzucki: Cast iron - the structure, properties and applications, ZG STOP, Kraków 1991 (in Polish).
• [2] W. Sakwa: Cast iron, Wyd. "Śląsk", Katowice 1974 (in Polish).
• [3] A. Tabor: Metalcasting, Cracow University of Technology, Training and Organisation Centre of Quality Systems, Kraków 2007 (in Polish).
• [4] E. Guzik, D. Kopyciński. The structure and impact resistance of austenitic cast iron for operation at low temperatures. Archiwum Odlewnictwa - Archives of Foundry, PAN Oddz. Katowice, 4, 2004, 12, pp. 115-120 (in Polish).
• [5] J. S. Rączka, A. Tabor: Optimising the chemical composition and manufacturing technology of austenitic ductile iron; Odlewnictwo - Nauka i Praktyka, Instytut Odlewnictwa, Zeszyt specjalny 2/2004 (in Polish).
• [6] W. Dziadur, J. Lisak, A. Tabor: Testing the corrosive behaviour of high-nickel ductile cast iron; Odlewnictwo - Nauka i Praktyka, Instytut Odlewnictwa, Special Edition 2/2004 (in Polish).
• [7] A. Tabor, W. Dziadur, K. Zarębski: Testing the mechanical properties of austenitic ductile iron, II National Scientific Conference on "Quality Problems - the Stimulator of Progress in Wasteless Technologies", Kraków 1999 (in Polish).
• [8] A. Tabor: The mechanism of solidification and formation of structure and properties in austenitic ductile cast iron. A Report of Research Project 7T08B 030 13 (in Polish).
• [9] Z. Ignaszak, J. Ciesiołka: The importance of knowledge synergy in identification and interpretation of selected casting defects on example of ductile iron castings. Proc. Conf. XII Seminar on Nondestructive Materials Testing, Zakopane 14-14 March, 2007 (in Polish).
• [10] J. N. Harvey, G. A. Noble: Inoculation of Cast Irons .An Overview, 55th Indian Foundry Congress 2007.
• [11] O. O. Oluwole, O. E. Olorunniwo, O. O. Ogundare, P. O.Atanda, O. O Oridota: Effect of Magnesium and Calcium as Spheroidizers on the Graphite Morphology in Ductile Cast Iron, Journal of Minerals & Materials Characterization & Engineering, Vol. 6, No.1 (2007), pp 25-37.
• [12] C. M. Ecob: A Review of Common Metallurgical Defects in Ductile Cast Iron, AFC-9 9th Asian Foundry Congress, Hanoi, Vietnam, October 15-18, 2005.
• [13] K. SHOJI, S. MASAYUKI, S. HARUYOSHI, N. KOKICHI: Formation Mechanism of Chunky Graphite in Heavy Section Nodular Graphite Cast Iron, Journal of Japan Foundry Engineering Society, VOL. 72, NO.5, PAGE.311-316 (2000).
• [14] H. Nakae, Y. Ygarashi: Influence of Sulfur on Heterogenous Nucleus Nodular Graphite, Materials Transactions, Vol. 43, No. 11 (2002) pp. 2826 to 2831.