Low alloy steel versus ADI - differences and similarities

• Autorzy: Krzyńska A. , Kaczorowski M.
• Języki publikacji: EN

Abstrakty

EN

The results of comparison between the microstructure of selected bainitic low alloy steel and austempered ductile iron ADI are presented. The aim of the comparison was to find out differences and similarities existing in these iron carbon commercial alloys. In this paper our own results on ADI structure and literature data were used. It follows from discussion presented here that both microstructure and properties of ADI are very close that which are observed in low alloy carbon steel. Moreover, we suggest that there is no so doubt to treat ADI mechanical properties as steel containing nodular inclusions of graphite.

Słowa kluczowe

EN

ADI; low alloy steel; structure; difference; similarities

PL

żeliwo sferoidalne; stal niskostopowa; struktura; różnica; podobieństwa

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2009
• Tom: Vol. 9, iss. 1
• Strony: 151--156
• Opis fizyczny: Bibliogr. 22 poz., rys., wykr.

Twórcy

autor

Krzyńska A.

autor

Kaczorowski M.

• Institute of Materials Processing, Faculty of Production Engineering Warsaw University of Technology, ul. Narbutta 85, 02-524 Warszawa, Poland

Bibliografia

• [1] P. A. Blackmore, R. A. Harding: Proc. 1st Int. Conf. On Austempered Ductile Iron, ASM, Materials Park, OH (1984) pp.117-134.
• [2] R. C. Vight: Cast Metals, 2 (1989), pp.71-93.
• [3] R. A. Harding: The Foundtyman, 86 (1993) p.197.
• [4] B. Bosnjak, B. Radulovic, K. Tonev, V. Asanovic: ISIJ International, 40 (2000) pp. 1246-1252.
• [5] R. B. Gundlach, J. F. Janowiak: Met. Prog., 128, No. 2 (1985) p.19.
• [6] J. Race, L. Scott: Heat Treatment of Metals, 4 (1991) p.105.
• [7] R. A. Harding: Foundry Trade Journal, 4 (1993) p. 192.
• [8] B. V. Kovacs: Trans. AFS, 102 (1994) pp.417-420.
• [9] B. V. Kovacs: Heat Treating of Austempered Ductile Iron, AFS Transactions, 99 (1991), pp. 281 - 290.
• [10] ASM Handbook: 1 Properties and Selection: Irons, Steel, and High-Performance Alloys, vol. 1, Tenth Edition, ASM Int., USA, 1990.
• [11] F. G. Caballero, M. K. Miller, C. Garcia Mateo, C. Capdevila, C. Garcia de Andrés: JOM, 60, No 12 (2008) pp.16-21.
• [12] A. Dimatteo, G. Lovicu, M. Desancti, R. Valentini, A. Solina: La Metallurgica Italiana, 11-12 (2006) pp. 37-40.
• [13] M. Y. Sherif, C. Garcia Mateo, T. Sourmail, H. K. D. H. Bhandesiha: Mat. Sci. Techn. 20 (2004) pp.319-322.
• [14] M. Kaczorowski, D. Myszka: On the differences between mechanical properties and structure of ductile iron castings Austempered using conventional and direct method, Int. Journal for Manufacturing Science & Technology, vol. 7 No. 1 (2005) p.33-39.
• [15] M. Kaczorowski, J. A. Kozubowski: Structure and Mechanical Properties of Austempered Ductile Iron (ADI), Proc.9th Int. Conf. Electron Microscopy of Solids, Zakopane, 6-9 May 1996, p.499.M. Kaczorowski, A. Krzyńska: Badania żeliwa sferoidalnego po dwustopniowym hartowaniu izotermicznym - cz. II, Archiwum Odlewnictwa PAN, vol.5, Nr 17 (2005) s. 131.A. Borowski: Prace ITMat., (1998) ss.29-34.
• [16] M. Kaczorowski, J..A. Kozubowski: The structure and properties of austempered ductile iron (ADI), Proc. IX-th Conference on Electron Microscopy of Solids, Kraków -Zakopane, May 1996, pp.499-502.
• [17] Metals Handbook, Ninth Edition, vol. 12 Fractography, ASM International Metals Park, Ohio, USA, 1987.
• [18] M. Kaczorowski: Struktura i właściwości mechaniczne żeliwa ADI, Archiwum Odlewnictwa, PAN, vol.1 nr 1 (2001) s.149.
• [19] G. Thomas, M. Goringe: Transmission Electron Microscopy of Materials, A Wiley-Interscience Publ., John Wiley & Sons, New York 1979M.
• [20] Kaczorowski, A. Krzyńska, M. Psoda: Badania strukturalne żeliwa sferoidalnego po dwustopniowym hartowaniu izotermicznym, Archiwum Odlewnictwa, PAN, v.4 Nr 12 (2004) s.127.
• [21] K.B. Rundman: Proc. 35th Australian Foundry Institute National Conference on Casting Concepts, Adelaide, South Australia, 31.10 - 3.11. 2004.
• [22] M. Kaczorowski: Struktura i właściwości żeliwa z grafitem mieszanym hartowanego izotermicznie, Archiwum Odlewnictwa, PAN, Vol. 3nr 9 (2002) s.127.